MX1485GCL (ASBEGEU) LG Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Tray ,Glass
0 of 1 people
found this instruction helpful.
-
Gena from ROSICLARE, IL
- Really Easy
- Less than 15 mins
Received my replacement Tray,Glass in only 2 days. Opened it and placed it in the Microwave. Yep, it was that easy!
Was this helpful?
Thank you for voting!
no heat
0 of 1 people
found this instruction helpful.
-
Nelia from Streamwood, IL
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
unplug the unit then pull down , lot of screws are on top. open the cover . you could see the parts that need to replace on the right hand side (heavy side). disconnect wires then test the parts that need to replace by a tester to make sure that it's really broke .then unscrew part and replace .
Was this helpful?
Thank you for voting!
Thermostat needed to be replaced
8 of 27 people
found this instruction helpful.
-
Denise from NORTH BEACH, MD
- Really Easy
- Less than 15 mins
-
Screw drivers
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping).
Unfortunately I probably won't order ... Read more from PartSelect again.
Unfortunately I probably won't order ... Read more from PartSelect again.
Read less
Was this helpful?
Thank you for voting!
Had to lift on the door for the microwave to run, suspected the door switches.
-
Arthur from Windham, NH
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Ordered the switches from Partselect, arrive in two days. Had trouble removing the plastic connectors from the old switch terminals, one of the plastic protectors broke, but was able to reuse it. It took a little figuring out how to remove the existing switches. Must push in a tab and rotate the switch on a little pin, then remove. Must b
... Read more
e careful not to break the plastic tabs holding the switches in place. Replaced all (3) switches at the same time. All in all it was pretty easy.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!