MW86 Microwave - Parts

This is just the exterior door and glass assembly. It is NOT the entire door for the microwave.

This microwave time delay fuse is a 20-amp safety component designed to protect the appliance from damage caused by power surges. If your microwave fails to start, a blown fuse may be the reason. Replacing it can help restore safe and reliable operation. Compatible with a wide range of models, this fuse is built to meet the performance ne...Read moreeds of many household appliances. Before installation, disconnect the microwave from its power source and wear protective gloves to ensure safety.

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.

This genuine microwave door switch lever is an essential component of the door interlock system, helping detect when the microwave door is properly closed so the appliance can operate safely. Designed to engage the door switch mechanism during opening and closing, it helps ensure the microwave starts only when the door is securely latched...Read more. Replacing a worn, cracked, or damaged lever can help resolve issues such as a microwave that will not start, intermittent operation, or failure to recognize that the door is closed. Made from durable plastic for reliable performance, this OEM replacement part helps restore proper door switch function and safe appliance operation. Installation typically involves disconnecting power, removing the outer cabinet or control panel as required to access the door switch housing, replacing the damaged lever, and reassembling the unit before testing operation. This is just the lever, not the switch itself.