MW0 - Overview
Models starting with MW0
Click on the best match to narrow your results.
- MW01927BAH (0000) Samsung Microwave (Mwo : Microwaveoven)
- MW05DMWBA1RCM Midea Air Conditioner (Midea Window Air Conditioner Mw05dmwba1rcm)
- MW06DRKBA2RCM Midea Air Conditioner (Midea 6,000 Btu Window Air Conditioner Mw06drkba2rcm)
- MW06DRWBA1RCM Midea Air Conditioner (Midea 6000 Btu Easycool Window Air Conditioner Mw06drwba1rcm)
- MW080WWBA2RC1 Midea Air Conditioner (Midea Window Air Conditioner Mw080wwba2rc1)
- MW08EWWBA2RCD Midea Air Conditioner (Midea 8000 Btu Easycool Window Air Conditioner Mw08ewwba2rcd)
- MW08MSWBA5RCM Midea Air Conditioner (Midea 8,000 Btu U-Shaped Air Conditioner Mw08mswba5rcm)
- MW09C1J (AWHBFRD) LG Air Conditioner (Residential Hvac)
- MW09Y3J (AWHBFRD) LG Air Conditioner (Residential Hvac)
- MW09Y3J LG Air Conditioner (LG Air Conditioner Model MW09Y3J Parts)
Keep searches simple, eg. "belt" or "pump".
BEARING
PartSelect #: PS12075835
Manufacturer #: 4280A20004M
Experience quality and durability with the LG Air Conditioner Blower Wheel Heat Pump Bearing. This genuine LG product ensures optimal performance of your room air conditioner by allowing the blower wh...
$12.85
In Stock
DC Indoor Motor Assembly
PartSelect #: PS12080217
Manufacturer #: EAU62004011
This DC indoor fan motor assembly is engineered to drive the fan within select LG air conditioner units, ensuring consistent airflow for both cooling and heating functions. By converting electrical en...
$152.44
On Order
FAN ASSEMBLY,CROSS FLOW
PartSelect #: PS3639073
Manufacturer #: ADP67813503
This cross flow fan assembly circulates air across the evaporator coil to ensure efficient cooling and even temperature distribution throughout the room. Engineered for quiet operation and balanced pe...
$75.13
In Stock
REMOTE CONTROLLER ASSEMBLY
PartSelect #: PS11760971
Manufacturer #: AKB74375403
This remote controller assembly allows convenient adjustment of appliance functions from a distance. Designed for responsive control and ease of use, it restores full remote operation when the origina...
$67.82
On Order
Wifi Module Subassembly
PartSelect #: PS18186742
Manufacturer #: 17310900003164
This Wi-Fi module subassembly is a genuine replacement component designed for select Midea air conditioners and dehumidifiers. It enables wireless connectivity, allowing users to control their units r...
$24.67
On Order
Knob Assembly
PartSelect #: PS18154231
Manufacturer #: 12100403001324
Say hello to the Basket Bottom Assembly from GE, the trusted brand you know and love. This essential piece of your refrigerator plays a key role in keeping everything running smoothly. Designed with s...
$7.47
In Stock
Display Printed Circuit Board Assembly
PartSelect #: PS12080401
Manufacturer #: EBR71522204
$36.85
Special Order
Common Symptoms of models starting with MW0
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Cross-flow Blower Fan
This repair was on an LG ductless heat pump. After some period of use, the inside unit will get very dirty inside with moisture, dust, and possibly mold. To clean the insides properly, you will likely have to remove the fan blower wheel. To do this, you will have to disassemble the outside covers of the unit. There are videos on YouTube t
... Read more
hat will give you some insight, but the different brands are all a little different in the way they are put together. However, it is still fairly straightforward to get access to the blower wheel. I removed the large outside cover (2 or 3 screws) and then loosened the drain tray at the bottom (also 2 or 3 screws). I did not take the drain tray off because it has the drain tube attached at the rear, and it appeared that it could be difficult to get this back together. Instead, I just removed the screws and pulled it down away from the blower wheel. I then loosened the coil assembly covering the top and front of the blower wheel (2 screws). Again, I did not try to remove the coil assembly because it has the refrigerant tubing attached. At this point, you can use a Phillips screwdriver to reach through the blower wheel on the right end and loosen the setscrew in the hub holding the blower wheel to the motor shaft. Once the screw is loosened, you can lift the coil assembly away and pull the blower wheel out to clean it. Unfortunately, while I was cleaning and drying the blower wheel (which was almost completely clogged with crud), I dropped it and it broke. I ordered the new part from this site. The part was on backorder, but after I received it, I used the reverse procedure to install the new blower wheel. The one thing that is a little tricky is that the setscrew in the blower wheel hub tightens down on a flat on the motor shaft, so you will have to be careful to get the two lined up as you push the blower wheel on the shaft because it is difficult to align them after the wheel is on the shaft. At this point, all you have to do is tighten the setscrew on the motor shaft and reassemble the unit NOTE: while you have the blower wheel out, you can get fair access to the housing inside the unit to clean it.
Read less
Parts Used:
-
Robert from BURTON, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!