- Home
- MUFF17VLRTA
- Instructions
MUFF17VLRTA Frigidaire Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer was building up ice. Running constantly.
0 of 3 people
found this instruction helpful.
-
eugene from norwalk, CT
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Parts Select is an excellent source for help and parts identification. I highly recomend them.
My first option was to replace the defrost timer.
After still getting ice and frost buildup in freezer I decided to replace the defrost thermostat.
Remove all shelves. Losen icemaker if applicable. Remove light cover and bulb. R ... Read more emove all screws securing rear vertical cover. Carefully move back panel, disconnect icemaker and bulb assembly. carefully remove styrofoam cover at upper left and remove defrost thermostat. I tested the thermostat and found it was defective. It would not close circuit after being placed in a working freezer. Reverse procedure to replace thermostat.
This solved the problem
My first option was to replace the defrost timer.
After still getting ice and frost buildup in freezer I decided to replace the defrost thermostat.
Remove all shelves. Losen icemaker if applicable. Remove light cover and bulb. R ... Read more emove all screws securing rear vertical cover. Carefully move back panel, disconnect icemaker and bulb assembly. carefully remove styrofoam cover at upper left and remove defrost thermostat. I tested the thermostat and found it was defective. It would not close circuit after being placed in a working freezer. Reverse procedure to replace thermostat.
This solved the problem
Read less
Was this helpful?
Thank you for voting!
No problems
2 of 9 people
found this instruction helpful.
-
Nancy from LEHIGH ACRES, FL
- Really Easy
- 15 - 30 mins
-
Wrench (Adjustable)
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
Was this helpful?
Thank you for voting!
freezer not staying cold enough
-
Kevin from Frisco, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
After researching other issues found on internet about same problem, decided to replace both thermostat and temperature control thermastat before going to the repairman way. I saw the videos given on this web site, ordered the parts and when they came in, unplugged freezer and started taking apart the back cover not sure what I would find
... Read more
. Turns out it was just that simple, unplugged the thermastat and unclipped it from the cooling fins, unplugged the temperature control switch and then plugged both units back in. The tricky part was coiling the temperature sensor ( not that tricky). I was done in about 45 minutes but that also included cleaning out and scrubbing the bottom and sides of freezer since I had everything out anyways. Started the freezer back up and took about 8 hours to freeze ice and other food at a setting of 4, where as before I had it set on 7 and was still not keeping the ice cream cold.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
would not defrost
-
Nick from Silver Spring, MD
- Really Easy
- 30 - 60 mins
-
Screw drivers
Replace thermostat and show and tell made it easy.
Was this helpful?
Thank you for voting!
Would not freeze or defrost
-
RONALD from Sevierville, TN
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Unplug freezer let stand all night to defrost. Remove the tray cover which is located on the upper back area inside the freezer.( 3 twist fittings remove it ). Remove the upper stainless steel panel which is secured with 6 screws. This will drop down exposing the condenser. Note all the wires and fan will stay attached to the stainless
... Read more
steel panel, this panel will drop down no need to unplug anything. On the left upper side next to the condenser you will see the thermostat. Two color coded wires. Remove the thermostat and install the new one at the same location.
Read less
Was this helpful?
Thank you for voting!
Freezer was no longer keeping items frozen,
-
Philippa from New York, NY
- Easy
- 30 - 60 mins
-
Screw drivers
I followed the You-Tube instructions, removed the ice from the compressor and replaced the thermostat with the part I received from Part Select. What I took out was a part that was very much inferior to the replacement part. The repair saved me a lot of money for a new freezer and it was not difficult to do following the video. Now the f
... Read more
reezer runs better and quieter than ever. Thank you Parts Select.
Read less
Was this helpful?
Thank you for voting!
thermostate stop working frozzen up
-
Augusto from Gretna, LA
- Really Easy
- Less than 15 mins
-
Nutdriver
just like the video show sa 1,2,3 yeaaa thanks
Was this helpful?
Thank you for voting!
stop-basket was broken
-
Kenneth from Tahlequah, OK
- Really Easy
- Less than 15 mins
I stuck the new stop-basket in the hole where it belonged.
Was this helpful?
Thank you for voting!
Freezer would constantly run. Even when it was super cold inside.
-
David from San Marcos, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I ordered a new thermostat and installed it in less than 15 minutes. Looks like the problem is fixed. Now ,the freezer cycles on and off correctly. The part was ordered on a Monday and I got it the next day. I am very satisfied.
Was this helpful?
Thank you for voting!
Freezer ran alot, then temperture began to vary.
-
John from Port Republic, VA
- Easy
- 15 - 30 mins
-
Screw drivers
Watched video on Part Select which shows you how to replace the thermostat with several good pointers. Very easily done and now the freezer works great.
Was this helpful?
Thank you for voting!
Freezer would not keep running and the temperature was too warm.
-
Edmond from Carroll, NH
- Really Easy
- 15 - 30 mins
-
Screw drivers
Followed the sites instructions. Empty the bottom part of the freezer. Remove the screws. Move the panel out of the way. Easily remove the old part and replace with the new. Put the panel and screws back in place. The freezer works.
Was this helpful?
Thank you for voting!
Temp skyrocketed
-
Wayne from Chatham, IL
- Really Easy
- Less than 15 mins
Took out three shelves. Removed 9 screws with a battery powered drill with a phillip screwdriver bit. Popped off the thermostat like I had seen on the video. Put the new thermostat on. Replaced the two wires one at a time. Reassembled the unit. This was so quick that my wife told me to let her know when I wanted to fix the freezer. She wa
... Read more
s shocked that I had completed the job. I'd been in the garage less than 10 minutes. It has been six weeks. and the freezer is working perfectly.
Read less
Was this helpful?
Thank you for voting!
Freezer freezes up; lower unit to warm
-
David from Front Royal, VA
- Easy
- 15 - 30 mins
-
Nutdriver
Replaced freezer defrost thermostat. Unit worked perfectly.
Was this helpful?
Thank you for voting!