MT765 (41AD765G977) MTD Trimmer - Parts

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part ...Read moreof proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their functio...Read moren of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

This Spark Plug is inserted into the cylinder head and is rated as "Easy" to install. The spark plug ignites the air fuel mixture inside the combustion chamber. If the part doesn't work, or is missing then the engine will not start and the spark plug must be replaced. This part should also be replaced annually as a part of proper engine maintenance. Tip: Gap to manufacturer's specs before installing.

The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose is to keep pressure on the Bump Head Knob Assembly.

This OEM Recoil Pulley Assembly includes Rope, Pulley and Inner Spring, and is a plastic kit which is rated "Medium" difficulty to install. Installation requires a screwdriver, pliers, socket set, and wrench set. This kit is used to house the starter rope. If damaged you might not be able to pull on the rope, it could become jammed. If broken, it should be replaced.

This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for replacing the carburetor mount gasket is if there is oil leaking from the crankcase, the crankcase gasket is missing or damaged or any time the ...Read morecrankcase cover is removed. This part is sold individually. The tools that you will need to replace the carburetor mount gasket is a receptacle for draining fuel, Phillip's / Torx drivers, long-nosed pliers and a razor blade.

This is a genuine manufacturer sourced replacement fuel cap assembly. It is supplied directly from original manufacturer for use with a variety of gas powered lawn and garden equipment. It is used to keep the fuel in the tank. If the fuel cap is damaged or lost it should be replaced for the unit to function safely. This is a plastic fuel cap that is sold individually.

The Recoil Spring is a silver, metal spring which attaches inside the starter assembly. It is used to wind the rope back around the pulley after it has been pulled. If broken, the starter rope will not retract and the part must be replaced. This spring is rated "Medium" difficulty to install and will requires a screwdriver, pliers and a wrench set.

This genuine OEM sourced item is specially designed for use with gas powered lawn and garden equipment. This rope is part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.

This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman trimmers. The trigger allows you to control engine speed, which in turn permits you to safely control the speed of the trimmer line. This part is made of plastic and is sold individually. For installation, you will need a screwdriver and a pair of needle nose pliers to aid you.