- Home
- MSWN1590LD
- Instructions
MSWN1590LD (CSAMPLE) LG Miscellaneous - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sparks from an old wave guide that needed to be replaced
5 of 6 people
found this instruction helpful.
-
Ellen from REDDING, CA
- Easy
- 15 - 30 mins
Put microwave on its side as my hands weren’t ready enough to hold it up while trying to push it in.
Put board on the door to hold it open.
Gently pushed the wave guide back as far as it would go. Then, I carefully pushed the front tabs in place. No bending. I had practiced on the old one first. Broke the 2 old tabs by pushing ... Read more back to hard so you need to be careful.
Put board on the door to hold it open.
Gently pushed the wave guide back as far as it would go. Then, I carefully pushed the front tabs in place. No bending. I had practiced on the old one first. Broke the 2 old tabs by pushing ... Read more back to hard so you need to be careful.
Read less
Was this helpful?
Thank you for voting!
Broken Glass Tray
5 of 8 people
found this instruction helpful.
-
Brenda from TALLAHASSEE, FL
- Difficult
- Less than 15 mins
It didn't work. It was too large. I need a glass tray NO LARGER than 13 1/2''. I received a 14" that was suppose to be comparable to the 13 1/2" glass tray that broke. The 14" is too large and wobbles. IF you have one that will fix my LG over the stove microwave Model # LMH 2016ST I would love to give it a try.
Was this helpful?
Thank you for voting!
The new part was too thick for the worn out plastic ring which is obsolete.
1 person
found this instruction helpful.
-
James from PURCELLVILLE, VA
- A Bit Difficult
- 30 - 60 mins
Needed to raise the part to match the ring. I used peanut butter to hold plastic shim while replacing to hold it in place. Built in Oct. 2009.
Was this helpful?
Thank you for voting!
broken glass
1 person
found this instruction helpful.
-
Irving from BEDFORD, NH
- Very Easy
- Less than 15 mins
Just replaced the inner turn table glass tray
Was this helpful?
Thank you for voting!
Replace broken tray
1 person
found this instruction helpful.
-
Harvey from COLUMBUS, NJ
- Very Easy
- Less than 15 mins
I opened the door and slid the tray into place.
Was this helpful?
Thank you for voting!
Broken 14” glass tray
1 person
found this instruction helpful.
-
Paul from WOODBURY, MN
- Very Easy
- Less than 15 mins
Simply set new tray on microwave rollers and insured glass groves fit on roller .
Was this helpful?
Thank you for voting!
Shaft socket was worn out
0 of 1 people
found this instruction helpful.
-
Cesar from Miami, FL
- Really Easy
- Less than 15 mins
Pop old one out and replaced it with new one.
Was this helpful?
Thank you for voting!
Glass tray broken
0 of 1 people
found this instruction helpful.
-
Ernest from Jacksonville, FL
- Really Easy
- Less than 15 mins
really easy
Was this helpful?
Thank you for voting!