MS-85MN LG Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
one of the little wheels kept coming off the ring.
1 person
found this instruction helpful.
-
Jerome from TECUMSEH, MI
- Very Easy
- Less than 15 mins
just lift the glass turntable off and take the ring out and put the new in and put the glass back.
Was this helpful?
Thank you for voting!
Door Latch spring keeper broke
3 of 8 people
found this instruction helpful.
-
Gregg J. from WEST CHESTER, PA
- Easy
- 15 - 30 mins
-
Screw drivers
Removed door from microwave and then popped the inside widow trim ring off. Removed 4 screws from the window bracket, replaced the latch with a new part and then assembled.
Was this helpful?
Thank you for voting!
Microwave failed to head and light, fan, and turntable failed to come on.
1 of 2 people
found this instruction helpful.
-
Robert from Cedar Park, TX
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws.
Was this helpful?
Thank you for voting!
Broken front leveler
8 of 36 people
found this instruction helpful.
-
K R from BOISE, ID
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
This is a very simple repair of remove and replace. You do have to lay down the range to make it easy.
Was this helpful?
Thank you for voting!
Microwave would not heat food, but everything else worked.
-
Samuel from Daleville, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.
Was this helpful?
Thank you for voting!