MRTG Refrigerator - Parts

This retainer bar (Refrigerator Door Shelf Bin, Refrigerator Door Shelf, Door Shelf Bin, Refrigerator Door Bin) holds items on the refrigerator door shelf. The plastic retainer can become brittle with time and crack or break under the strain of normal use. It can also break if heavy items are placed in the door shelf. If this part will no...Read more longer hold securely onto the inner door panel it will need to be replaced. This model is white plastic, and measures 26 by 5 inches. Sold individually.

This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh food drawer, check the support rails for any blockage, or visible damage. If the rail is damaged, it should be replaced ...Read moreto ensure no further damage is done to the drawer itself. The repair is straightforward: unscrew and remove the existing support rail, then fasten the new rail in place. This genuine OEM replacement part is made of plastic and is white in color. NOTE: This part is sold separately from the left side drawer support rail. The part measures approximately 16 inches long by 1 inch high.

The Door Rack (also known as a retainer bar) is a 23" white plastic part used to hold small items inside the fridge door. If broken, it should be replaced. Refer to your user manual and model number to determine if this part is correct for you. This is a simple part to repair and should not require any tools. Most customers found it to be...Read more very easy to simply snap the old rack out of place and snap the new one back in, making sure the locking tabs are secure. This part is sold individually and not as a part of a kit. It is certified by the original manufacturer.

This white refrigerator door handle is a genuine OEM replacement designed for use on both the freezer and fresh food doors of select models. Constructed for durability and a secure fit, this handle restores functionality and appearance to your appliance. Installation is straightforward and requires only a Phillips screwdriver. To replace,...Read more remove the two screws from the top of the door, slide out the old handle, attach the mounting block to the new handle, and secure it in place. Always verify model compatibility before purchase.

This refrigerator crisper shelf insert is a genuine replacement component designed to sit above the crisper drawers, providing a stable surface for food storage while helping to maintain proper humidity levels below. Measuring approximately 23.82 inches by 15.50 inches, it is made of durable glass and fits select Frigidaire refrigerator m...Read moreodels. Installation is tool-free—simply remove the old insert and slide the new one into place. This OEM part is sold individually and ensures a precise fit and reliable performance.

This left-side meat pan hanger is a genuine replacement component designed for select Frigidaire, Electrolux, White Westinghouse, Tappan, and compatible refrigerator models. It provides structural support for the sliding deli or meat drawer, ensuring smooth operation and proper alignment. Constructed from durable materials, this OEM part ...Read morehelps prevent drawer sagging, misalignment, and difficulty opening or closing. A broken or worn hanger may result in the drawer dropping or becoming stuck. Replacing this support rail restores drawer functionality and contributes to overall refrigerator organization. For full support, the corresponding right-side hanger is part number 240530701. Always verify compatibility using your refrigerator’s model number.

Frost near the door, long cooling cycles, or a warm refrigerator can result from a cracked or twisted fresh-food door seal. The gasket forms a tight barrier between the door and cabinet, helping hold cold air inside. First check for spilled food, loose hinges, bent door parts, or shelves that stop the door from closing. Match the replacem...Read moreent to the full appliance model before ordering. Disconnect power and move food to a cooler during the repair. Smooth shipping creases with warm water or low heat, but do not overheat the material. Install the seal without stretching it, then test several spots around the closed door with a sheet of paper.

This refrigerator door shelf bar is a genuine replacement component designed to restore secure storage within the door compartment of select refrigerator models. Measuring 24 inches in length and molded from durable white plastic, it attaches easily to the interior of the refrigerator door to hold bottles, condiments, and other small item...Read mores in place. Its design helps prevent spills and disorganization by keeping contents stable when the door is opened or closed. This part is compatible with a wide range of models from Frigidaire, Kenmore, and related brands such as Kelvinator, Gibson, and Electrolux. Installation is straightforward, requiring no tools—simply snap it into place. Replacement is recommended if the original bar is cracked, broken, loose, or no longer holds items securely. Always verify your refrigerator’s model number to ensure proper fit.

This sliding glass refrigerator shelf is a genuine OEM replacement part designed for select models from Frigidaire, Electrolux, Kenmore, and Tappan. Known for its “Spill-Safe” design, the shelf features a raised lip to contain spills and prevent liquids from leaking onto lower shelves. The integrated sliding mechanism allows for easy acce...Read moress to items stored at the back of the refrigerator, while the built-in pan hanger adds organizational flexibility, particularly for meat storage. Constructed from durable materials, including a white base and clear glass top with a central metal auger, this shelf is designed for long-term reliability and tool-free installation. Compatibility should be confirmed using your refrigerator’s model number.

This defrost thermostat is also known as a refrigerator defrost bi-metal thermostat kit. The function of the defrost bi-metal thermostat is to prevent overheating during the defrost cycle in your refrigerator by protecting the evaporator. The most common sign that there is a problem with your refrigerator defrost thermostat kit is if your...Read more freezer is cold but your refrigerator is warm. If your evaporator coils are icy then your defrost bi-metal thermostat kit could be defective. To do this installation the tools you will need include a 1/4 inch nut driver, a pair of wire strippers and crimpers, and a heat gun.

This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator door. This is an OEM part sourced directly from the manufacturer.

This crisper pan cover is designed to help maintain optimal humidity levels within your refrigerator’s crisper drawer, keeping fruits and vegetables fresher for longer. It includes both the frame and insert, forming a protective barrier that prevents moisture loss and shields contents from spills and debris. In addition to supporting food...Read more freshness, the cover provides structural stability for the drawer and glass shelf above. Be sure to confirm compatibility with your refrigerator model before ordering.