- Home
- MRT18CSGD0
- Instructions
MRT18CSGD0 Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Defroster didn't work
1 of 2 people
found this instruction helpful.
-
George from Eatonville, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Ordered a new defroster timer and replace old one. It works just fine. A $35 repair vs a $500 new appliance.
Cool.
GWE
Cool.
GWE
Was this helpful?
Thank you for voting!
door shelf end caps were broken
1 of 3 people
found this instruction helpful.
-
Lupe from Las Cruces, NM
- Really Easy
- Less than 15 mins
-
Screw drivers
removed broken end caps, took a small screwdriver and simply applied a little pressure to release them. Pushed new end caps into place (they just snap in). Presto done!!
Was this helpful?
Thank you for voting!
Need to install handles on Refrigerator
2 of 6 people
found this instruction helpful.
-
Renato from Jacksonville, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
I drill three holes on the freezer door and three holes on the refrigerator door and attached the handles with six 7/8"
screws. I used white screws. There is nothing to it. It was very easy.
screws. I used white screws. There is nothing to it. It was very easy.
Was this helpful?
Thank you for voting!
light bilb went out
2 of 6 people
found this instruction helpful.
-
Denise from Landover, MD
- Really Easy
- Less than 15 mins
replaced it
Was this helpful?
Thank you for voting!
door shelf ends broken off from constant pulling on door and slaming it with 2 gallons of milk in door.
1 of 3 people
found this instruction helpful.
-
Katherine from Lafayette, LA
- Really Easy
- Less than 15 mins
Inserted the caps into the bar and snapped in door. That's it.
No tools needed! Hope it last another 20 years
No tools needed! Hope it last another 20 years
Was this helpful?
Thank you for voting!
sheft ends brolen
0 of 1 people
found this instruction helpful.
-
Helen from Gulf Breeze, FL
- Really Easy
- Less than 15 mins
Cleaned and removed old ends, applied new ends and installed. Ends fit to order, shipping quick and parts affordable. Thank you
Was this helpful?
Thank you for voting!
Freezer built ice, fridge not cold enough and running constantly.
1 of 4 people
found this instruction helpful.
-
LUIS from CENTENNIAL, CO
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
Was this helpful?
Thank you for voting!
The door end caps were broken and not fixable
0 of 1 people
found this instruction helpful.
-
Ryan from Coralville, IA
- Really Easy
- Less than 15 mins
I simply placed the retention bar between the new end caps and popped it into place. Took about 10 seconds to complete.
Was this helpful?
Thank you for voting!
clips on both end caps we broken and the crossbar kept falling off.
0 of 1 people
found this instruction helpful.
-
Frank from Orange Park, FL
- Really Easy
- Less than 15 mins
First i pulled the crossbar off the door, then I pulled both end caps off the crossbar and then I
put the two new end cap on the crossbar and then tapped snoggly into place with the palm of my hand. Job done. took all of about 5 seconds.
put the two new end cap on the crossbar and then tapped snoggly into place with the palm of my hand. Job done. took all of about 5 seconds.
Was this helpful?
Thank you for voting!
door end cap broken,
0 of 1 people
found this instruction helpful.
-
Edward from Piscataway, NJ
- Really Easy
- Less than 15 mins
Put the new ordered door end caps in place, everything worked fine.
Was this helpful?
Thank you for voting!
Freezer door shelf end cap broke
0 of 1 people
found this instruction helpful.
-
Melanie from Green Bay, WY
- Really Easy
- Less than 15 mins
The only problem I had was that the end cap was sent before the rack. This refrigerator is in our cottage and I brought up the end cap while waiting to receive the rack. I couldn't remember where I put the end cap, so when the rack came it took me a few weekends to find the end cap. Once I did, it took me less than 1 minute to repair.
... Read more
I put the rack on the end caps & pushed the end cap in place. DONE!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
frezzer iceing over and not cooling the refrigerator
1 of 4 people
found this instruction helpful.
-
Marcus from Pine Hill, AL
- Really Easy
- Less than 15 mins
Just removed the two screws and unpluged it.
Then I pluged the new one in and replaced the screws. It runs like a brand new reffrigerator.
Thanks for the fast delevery. Will do busness with you in the future.
Then I pluged the new one in and replaced the screws. It runs like a brand new reffrigerator.
Thanks for the fast delevery. Will do busness with you in the future.
Was this helpful?
Thank you for voting!
Wrong size listed on website.
0 of 1 people
found this instruction helpful.
-
Elizabeth from Weems, VA
- Really Easy
- Less than 15 mins
The end cap is easy to remove and replace. The personnel at PartSelect was extremely helpful in re-ordering the correct part.
Was this helpful?
Thank you for voting!
End caps broken
0 of 1 people
found this instruction helpful.
-
Russell from Clevelamd, TN
- Really Easy
- Less than 15 mins
End caps snapped out of door,
Replaced with new caps
Replaced with new caps
Was this helpful?
Thank you for voting!
loud noise fan blade broke,off balance
0 of 1 people
found this instruction helpful.
-
EDWIN from ELWOOD, IN
- Really Easy
- 15 - 30 mins
-
Nutdriver
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Was this helpful?
Thank you for voting!