EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MRS22WR Frigidaire Refrigerator - Instructions

All Instructions for the MRS22WR
121 - 135 of 451

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Blown thermal fuse for Ice Maker
3 of 5 people found this instruction helpful.
  • Derekandkelsey from WINCHESTER, VA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
After disassembling, the thermal fuse I ordered were not and exact fit, I had to cut off the ring terminals, strip the insulation back and splice it in.
It works.
Was this helpful?
Thank you for voting!
freezer was warm
2 of 2 people found this instruction helpful.
  • Carol from OSHKOSH, WI
  • Easy
  • 30 - 60 mins
  • Screw drivers
Top freezer took off the panel in freezer and melted the ice around coils and found the defrost thermostat and replaced with the new one. Just followed the instructions from your video on line. Freezer works just fine now. Refrigerator is 38 years old.
Was this helpful?
Thank you for voting!
Ice Maker Stopped Making Ice
3 of 5 people found this instruction helpful.
  • PERRY from LOWER BURRELL, PA
  • Easy
  • Less than 15 mins
  • Nutdriver
Removed power , unplugged wires and 2 screws then reversed the process 1 hour later first batch of cubes dropped into bin
Was this helpful?
Thank you for voting!
plastic sidewall of drawer split
2 of 2 people found this instruction helpful.
  • Steve from Cedar Park, TX
  • Really Easy
  • Less than 15 mins
ordered new drawer, removed the clear plastic front piece from old one and installed on the new one. It was delivered only one or two days after I ordered it and was in perfect condition. Excellent service.
Was this helpful?
Thank you for voting!
Poor design resulted in lower crisper drawer breaking on both sides.
2 of 2 people found this instruction helpful.
  • Art from Bullard, TX
  • Really Easy
  • Less than 15 mins
Got the new drawer 2 days after I ordered it. Snapped the front off the old drawer and onto the new one, and slid the new drawer in.
Was this helpful?
Thank you for voting!
Sides of drawers were cracked, unable to use.
2 of 2 people found this instruction helpful.
  • Donna from Buffalo, NY
  • Really Easy
  • Less than 15 mins
I found PartsSelect on the web, input my appliance model# and type and a very easy to read diagram of my appliance appeared. I simply selected the parts I needed from the diagram,and the part numbers were displayed. I placed my order and 2 days later the parts arrived, and I installed them immediately. No fuss, no problem. Great Service!
Was this helpful?
Thank you for voting!
the slider broke on the drawer and couldn't move in or out.
2 of 2 people found this instruction helpful.
  • Deborah from Wichita, KS
  • Really Easy
  • Less than 15 mins
front of old drawer needed a little persuasion at coming off, but once I figured out all I needed was a small screw driver to seperate the front from the drawer, it slid right off. Was a simple fix and a lot less than calling service repair.
Was this helpful?
Thank you for voting!
door closer spring had broken
5 of 11 people found this instruction helpful.
  • dwayne from lincoln, NE
  • Really Easy
  • Less than 15 mins
  • Socket set
A pretty easy, remove and replace, project. The spring that closes the fridge door had broken. Just pulled out the old part on top of the appliance and put in the new part. I noticed that part of the problem was that the bottem hinge needed a little lubrication too, as the door wasn't closing as easy as it should with the new part inst alled. I can't complain though, the side by side fridgeadaire is getting old and this was a very easy fix.
Was this helpful?
Thank you for voting!
freezer colk, refrig warm
2 of 2 people found this instruction helpful.
  • Jeff from GLENDORA, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Followed the instructions provided in your video, took less than 15 minutes and works like new. Thank you for the parts and the advice.
Was this helpful?
Thank you for voting!
4 broken drawer cover supports
2 of 2 people found this instruction helpful.
  • Chester from STOCKTON, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Followed someone before me instructions. very simple and easy
Was this helpful?
Thank you for voting!
Drawer was broken.
2 of 2 people found this instruction helpful.
  • Margaret from GIBSON CITY, IL
  • Really Easy
  • 15 - 30 mins
We moved the refrigerator out so the drawer could be removed. (It was close to the wall) After removing the drawer the front of it had to be removed, then put on to the new drawer. The hardest part was that replacement because we had trouble getting it lifted up. Then the drawer was put in, refilled, and refrigerator moved back into pl ace.
Was this helpful?
Thank you for voting!
ice maker quit working/and it was leaking
2 of 2 people found this instruction helpful.
  • KATHY from MURFREESBORO, TN
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
BOUGHT NEW ICEMAKER TOOK TWO SCREWS OUT, UNPLUGGED THE ELECTRICAL CONNECTION. REMOVED OLD ICEMAKER, PUT TWO SCREWS BACK INTO REFRIGERATOR(DON'T SCREW ALL THE WAY IN AS THE NEW ICE MAKER WILL FIT ON. HOOK ELECTRICAL CONNECTION AND ADAPTER (THAT COMES WITH IT). PUT THE DRAIN TUBE IN ITS SPOT, HOOK ICE MAKER ONTO THE TWO SCREWS TIGHTEN EM DOWN. I DID THIS RIGHT BEFORE I WENT TO A BIRTHDAY DINNER WITH MY HUSBAND, WAS ALREADY DRESSED AND READY TO GO AND I TOLD HIM ILL PUT IT IN SO WE CAN HAVE ICE WHEN WE RETURN. ENDED UP BEING A SURPRISE PARTY FOR ME AND WHEN WE RETURNED WE HAD ICE. IT WAS SO EASY EVEN A GIRL CAN DO IT!!
Was this helpful?
Thank you for voting!
Fridge not cooling
3 of 5 people found this instruction helpful.
  • WESTLEY from HATTIESBURG, MS
  • Easy
  • 15 - 30 mins
  • Nutdriver
My fridge side had warmed up to 70 degrees but the freezer side was still cold. The coils inside had iced up. After thawing with a hair dryer, it froze back after another week. I removed the old defrost thermostat and wired the heater strip directly and turned on the defrost timer. It began melting the ice so that ruled out the heate r strip being bad. I couldn't get a reading with my ohm meter on the defrost thermostat so I took a chance and bought the part. Installation was a breeze and it fixed the problem.
Was this helpful?
Thank you for voting!
Fan not running.
3 of 5 people found this instruction helpful.
  • chester from Oak Lawn, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed old fan and replaced it.3 screws and plug.Always unplug appliance when working on it.
Was this helpful?
Thank you for voting!
Ice maker stopped working
2 of 2 people found this instruction helpful.
  • Joseph from Seal Beach, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First I determined the icemaker was the problem when it was no longer calling for water. You can hear that "whistle" for 6-7 seconds when it calls for water. Anyway, replacement was a piece of cake, but did not entirely fix my problem. I also had to flush the lines to the soloniods that allow water to flow through the filter and into the water storage tank because it was cloggged with a little piece of plastic.
Was this helpful?
Thank you for voting!
All Instructions for the MRS22WR
121 - 135 of 451