MRML36 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The stove's burner bowls were dirty and old and the chrome was gone where the cooking drippings had collected under the previous owner's usage.
0 of 2 people
found this instruction helpful.
-
Patty A from Noblesville, IN
- Really Easy
- Less than 15 mins
We simply typed in the model of the range and several selections of replacements came up on your website. We ordered the black porcelain ones to replace the old chrome ones, thinking they might hold up better and be easier to clean. They look great and I really think they WILL be easy to wipe up. Thank you, Part Select! Patty in India
... Read more
na
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Incorrect Burner Bowls
0 of 2 people
found this instruction helpful.
-
Valerie from Corvallis, OR
- Really Easy
- Less than 15 mins
For 12 years I've been suffering with the incorrect burner bowls...I love to cook and it's really irritating when your bowls don't fit correctly. Now, I am amazed at how my burners fit! Thank you! What a Blessing!
Other Parts Used:
Was this helpful?
Thank you for voting!
Trim has tendancy to rust on range oven door
-
Carole from San Diego, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrewed bottom screws, replaced trim. No trouble.
Was this helpful?
Thank you for voting!
bowls were worn out
-
frances from winston salem, NC
- Really Easy
- Less than 15 mins
Open the box and inserted the bowls
Other Parts Used:
Was this helpful?
Thank you for voting!
slot that heating element fits was worn down and caused burners to be uneven
-
Judith from Broadway, VA
- Really Easy
- Less than 15 mins
replaced with new ones
Other Parts Used:
Was this helpful?
Thank you for voting!
6" and 8" burner bowl replacement
-
Shawn from Lubbock, TX
- Really Easy
- Less than 15 mins
Slide out burner elements. Remove old burner bowls. Insert new burner bowls and reinstall burner elements.
Other Parts Used:
Was this helpful?
Thank you for voting!
Replaced All Burner Receptacles After One Failed And Also Replaced Ball Burner Bowls
-
ROBERT from MECHANICSBURG, PA
- Really Easy
- Less than 15 mins
This installation was for a replacement for one of the burner bowls on the original order. Replacement bowl fits proiperly.
Was this helpful?
Thank you for voting!
Burner bowls had been used and abused for year gone by in this rental.
-
Diane from Rio Rancho, NM
- Really Easy
- Less than 15 mins
Replaced them all. Next I want to replace the burners.
Other Parts Used:
Was this helpful?
Thank you for voting!
Trim part on bottom of door was rusty
-
Richard from Euclid, OH
- Easy
- 15 - 30 mins
-
Nutdriver
I ordered the part, It came a few days later,,Within 15-20 minutes, I had it installed..Pretty easy...Thanks
Was this helpful?
Thank you for voting!
one leg of the terminal block was loose and overheated under load.the terminal block melted and could have caused a fire.
-
brendan from lebanon, NH
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set, Wrench set
I took a picture of the setup and damage . I then disconnected the burnt wires and replaced the wires . Then I installed the new terminal block and connected the wires to the proper positions. The reason for the failure was that the delivery people didn't tighten the cord when they installed the stove . I would check the connections per
... Read more
iodically as to avoid another situation like this .
Read less
Was this helpful?
Thank you for voting!
Rusted oven door trim
-
Todd from Pittsburgh, PA
- Easy
- 30 - 60 mins
-
Nutdriver
Removed old part by removing the screws at the boottom of the oven door. I wasn't sure if the glass oven door cover would remain in place once the trim piece was removed, fortunately I was ready when it came down. The glass cover is large and heavy so you need to be ready to handle the bulk of this piece once the last screw is removed.
... Read more
Cleaned everything and with the help of my wife, who secured the oven door cover in place, secured the new trim piece by replacing the screws. What a difference, looks like new! PartSelect provided great service in terms of speed and part acciracy.
Read less
Was this helpful?
Thank you for voting!
The burner bowls were encrusted with grease and spills.
-
Ed from Canyon City, CO
- Really Easy
- 15 - 30 mins
I easily took out the old ones and put in the new ones sent by Part Select. As promised they fit perfectly. Now when my wife cooks there is no more smoke and it does not set off the smoke detector.
Other Parts Used:
Was this helpful?
Thank you for voting!