MLY2256AD* Maytag Range - Instructions

pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.

Just ordered a new grate. Everyother place I talked to said the one piece grate would not fit, so I am very pleased with the service you offered.

Placed the grommets in the specific hole on the stove top and pushed down. The grommets fit perfectly and the burners are now stable once again.

Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done

My local RV store informed me that this part was no longer made. Fortunately I discovered PartSelect.com and found the part I needed. Slipped it on and now I can use my oven!!!! Thanks!

This item had to be returned. Didn"t fit. Our shaft is shorter, and the new knob would not stay on.

easy replaced after giving proper model and serial numbers. They were very helpful sending pictures so i could choose which knob might work as they had two for the same model number. The person answering my call was very helpful. Also return of the wrong ones I ordered was easy and refund prompt. I would highly recommend this company. ... Read more Gail from Mo.

removed flare nut and the two screws pull coupler back put in new one

The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.

The old knob simply slides off the shaft. I aligned the fins on the back of the new knob with the grooves on the shaft of the ignitor and pressed the new knob on.