My Orders
- Home
- MGR7661WS4
- Instructions
MGR7661WS4 Maytag Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Often would not heat. Burners on syove were O.K.
-
Bruce from Michigan City, IN
- Easy
- 1- 2 hours
-
Screw drivers
Removed door per instructions in manual. Removed racks and storage drawer per manual. Removed two phillips head screws holding bottom pan and removed pan. Removed two phillips head screws holding igniter tube (#12) and withdrew tube from the cavity. Removed two phillips head screws holding igniter and bracket to the tube. Unplugged elcetr
... Read more
ical connection to igniter and installed new igniter in reverse order. Too bad the igniter wasn't the problem.
Read less
Was this helpful?
Thank you for voting!
Bottom Door Trim Rusting
-
Dennis from Grimsley, TN
- Easy
- 1- 2 hours
-
Screw drivers
I remove bottom trim which is held on by 3 screws and try to install new bottom trim, did not work well. I then remove yop handle assem. Then the door glass which you need to clean after. Then install the new bottom trim then insert the glass into the new bottom strip using masking tape to hold the glass and side strips in place prior
... Read more
to installing the the top handle piece which is held on by two screws. Not a hard job to do.
Read less
Was this helpful?
Thank you for voting!