EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MGR7661WS1 Maytag Range - Instructions

All Instructions for the MGR7661WS1
121 - 135 of 149

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove kept turning off
  • Richard from Wooster, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Looked up on-line the error problem and what part I needed to fix it. Part arrived very quickly and everything was going fine until I realized the stove had two sensors. Replaced the top sensor now I am getting an error on the bottom sensor. Maybe I replaced the wrong one. I will replace the bottom sensor with the one I took out and s ee if that does the trick. Very very satisfied with PartsSelect. Good Price, Quick Shipping, Would do business with them again. They are now in my favorites so I can find them again if I need parts.
Was this helpful?
Thank you for voting!
Bake would not work all the time
  • Philip from New York, NY
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
The bake part of the oven was not igniting all the time . I checked the website and they don't list the igniter separately from the burner tube. This part is the exact fit for the igniter. There is no need to buy the whole kit if the igniter is all you need. it will fit right on the burner tube with no modification at all. Part number PS8 97264 is the igniter and burner tube. Part number PS898618 is just the ignitor.
Was this helpful?
Thank you for voting!
Oven shutting off after temp reached 350
  • Ken from Las Cruces, NM
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Remove the plug from outlet then shutoff gas. Remove the 10 screws hold the back panel of the oven. Unclip the connector of the temperature sensor from the main line. Pull the sensor straightout. Reverse the process install the new sensor. Couldn't be any easier. Oven working great. Calling in a reapairman would have cost $200 for parts a nd labor.
Was this helpful?
Thank you for voting!
Burner Grate coating was damaged
  • Joseph W from Anaheim, CA
  • Really Easy
  • Less than 15 mins
Remove old grate and replace with new one.
Was this helpful?
Thank you for voting!
All Instructions for the MGR7661WS1
121 - 135 of 149