MGC7536WB00 Maytag Cooktop - Instructions

I installed the Cap-Burner on the left front right, and then the gas ignited and I was able to use the stove.

Simply remove two screws take old one off and line up and put new one on and replace the two screws. Couldn't have been easier.

Received the burner cap, placed on the burner to complete the installation.

I purchased an 8" canning element for my new Kenmore Stove. The ordering process was easy. I printed my order out. I did not receive a confirmation by email, however I received the part in a timely manner. I was satisfied with the process.

A very simple repair.
I inserted the brackets and screwed them in position

First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the o ... Read more ld unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again

Removed the existing element and replaced it with the new one.