EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MFU12M2GW0 Frigidaire Freezer - Instructions

All Instructions for the MFU12M2GW0
1 - 7 of 7

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
ice was accumulating around door
40 of 50 people found this instruction helpful.
  • Cindy from Woodinville, WA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed all of the screws around the door and then removed the old gasket and fitted new gasket into place and replaced the screws
Was this helpful?
Thank you for voting!
While defrosting freezer tossed the drain plug with ice and water into the sewer system.
4 of 5 people found this instruction helpful.
  • paul from LISLE, IL
  • Very Easy
  • Less than 15 mins
Opened mailer and bag and place the drain plug into the drain. fit perfectly. In fact it is better than the one lost since the original needed a screwdriver or tool to remove the plug. This one has a flang or finger turner on it so that it can be removed. Also, does not interfere with items in bottom of freezer.
Was this helpful?
Thank you for voting!
food was thawing, water on floor from defrosting.
3 of 3 people found this instruction helpful.
  • James from XENIA, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed the main screw to expose the cold control, checked for power at the 2 power terminals. no power. ordered new control and resolved the problem. easiest repair I have ever done.
Was this helpful?
Thank you for voting!
Not cooling at all.
3 of 7 people found this instruction helpful.
  • Kathleen from Casper, WY
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed four screws and took out the old cold control and put in the new one. This saved me almost $250 dollars by doing it myself.
Was this helpful?
Thank you for voting!
Plastic shelf supports broken
6 of 24 people found this instruction helpful.
  • shari from west sand lake, NY
  • Easy
  • 15 - 30 mins
  • Pliers
Needed to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm!
Was this helpful?
Thank you for voting!
Door wasn't sealing tight
  • Diane from Mercer, ME
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Loosened the screws all around the door, took out old gasket. Washed with bleach solution to remove mildew, wiped. Pushed new gasket into groove, tightened screws.
Was this helpful?
Thank you for voting!
Ice Build Up In Top Section Of Freezer
  • david from new port richey, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Took out top hinge bolts. Lifted door off. Set door on floor and removed all the screws holding gasket on. Replaced with new gasket after warming gasket with a hair dryer. Piece of cake, saved alot of money doing it myself! Thanx so much. David jones.
Was this helpful?
Thank you for voting!
All Instructions for the MFU12M2GW0
1 - 7 of 7