MEX731CFS0 Uni Washer Dryer Combo - Parts

The capacitor is used on the washer motor to help the motor get up to speed quickly before transferring power to the run capacitor.

This water inlet hose is used in washers. The hose connects the washer water inlet valve to the water supply in your home. There are two solenoids on the valve, which are referred to as coils, and there are two wires attached to each solenoid that should be labelled to ensure they are properly reconnected after replacing the new hose. Ove...Read morer time, your hose can begin to leak which can lead to floods. Replacing your hose earlier on can prevent this problem. Refer to the diagram provided by the manufacturer for installation instructions. Remember to unplug your appliance from the power source before beginning this installation project.

Sold Individually. Pan Head Screw - 8-18ab X 0.375

This dryer drive motor is a key component in washer/dryer combo units, responsible for rotating both the drum and blower wheel to facilitate efficient drying. It features dual shafts—one driving the drum via a belt and the other powering the blower wheel to circulate air throughout the appliance. Designed for durability and consistent per...Read moreformance, this motor helps maintain proper airflow and tumbling action, ensuring clothes dry evenly. Common symptoms of a failing motor include a drum that won’t turn, poor drying results, or unusual noises during operation. Compatible with select Frigidaire, Electrolux, White Westinghouse, and Kenmore models, this genuine OEM part should be installed with the power disconnected to ensure safety.

The tub ring seal or splash cover seal is used for washers. This part seals the tub cover to the outer one and prevents water leakage from around the tub ring. If your seal is damaged and you are experiencing water leakage, it is best to replace this part. Refer to the manual provided by the manufacturer for further installation instructi...Read moreons. Remember to unplug your washer from the power source before starting this installation process.

This part helps with the spinning and agitating cycles.

This screw is a little over an inch long.

Appliance requires 2. Sold Individually. They are located on top of the service panel to be able to attach it to the main frame of the washer.

This dryer air duct seal is designed to create a tight barrier within the appliance, helping direct airflow through the drum and lint filter for efficient drying performance. By preventing air and lint from escaping into the cabinet, it supports proper temperature regulation and reduces buildup inside the unit. Replacement is recommended ...Read moreif drying times increase, airflow weakens, or lint begins accumulating in unwanted areas, helping restore efficient and reliable operation.