My Orders
- Home
- MER7775WS2
- Instructions
MER7775WS2 Maytag Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
range would not heat right
1 person
found this instruction helpful.
-
bobby from HERSCHER, IL
- Really Easy
- 30 - 60 mins
-
Screw drivers
very easy watched the howto you gave
Was this helpful?
Thank you for voting!
Electric burner element not working
1 person
found this instruction helpful.
-
Ronald from The Villages, FL
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
Video said to remove screws and lift stove top off, remove contacts and ground. My stove top was hinged and required me to lift and pivot stovetop up. The burners were anchored to the stove base not the top. I secured the topso that it would not drop down and proceeded with repair
Was this helpful?
Thank you for voting!
Oven temperature was 50 degrees off
1 of 2 people
found this instruction helpful.
-
Gregory from BRIDGEBORO, GA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
Unplugged stove.
Pulled stove out.
Unscrewed screws and removed cover.
Removed & replaced sensor.
Reinstalled cover & screws.
Plugged in stove and pushed back in.
Only problem was when I pulled stove out, lid opened and disconnected the gas line to a burner.
Pulled stove out.
Unscrewed screws and removed cover.
Removed & replaced sensor.
Reinstalled cover & screws.
Plugged in stove and pushed back in.
Only problem was when I pulled stove out, lid opened and disconnected the gas line to a burner.
Was this helpful?
Thank you for voting!
Glass Door Broken
3 of 8 people
found this instruction helpful.
-
Myron from Punta Gorda, FL
- Easy
- 15 - 30 mins
-
Screw drivers
Removed 3 screws holding the glass door bracket.
Placed glass into door holders, had another person hold glass while I replaced the removable bracket screws.
Placed glass into door holders, had another person hold glass while I replaced the removable bracket screws.
Was this helpful?
Thank you for voting!
Light would not light
1 of 2 people
found this instruction helpful.
-
Frank from LEBANON, VA
- Easy
- 15 - 30 mins
-
Pliers
Pop old one out and new one in
Was this helpful?
Thank you for voting!
cleaner
2 of 5 people
found this instruction helpful.
-
Mary from Duarte, CA
- Really Easy
- Less than 15 mins
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you
Was this helpful?
Thank you for voting!
oven light not working
2 of 6 people
found this instruction helpful.
-
Richard from Gaylord, MI
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
replaced light socket but did not repair problem. must have burned the motherboard.
pleased with service from your company.
pleased with service from your company.
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people
found this instruction helpful.
-
Ivanka from Atlantra, GA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh
... Read more
t bulb in was not the problem.
Read less
Was this helpful?
Thank you for voting!
Heats up very slow
14 of 42 people
found this instruction helpful.
-
Carl from GAHANNA, OH
- Really Easy
- 30 - 60 mins
-
Screw drivers
Unplugged the range, remove back electrical cover and component cover. Unscrewed old temp sensor and replaced it with new. Oven heats quicker (just by indication) since the probe is only a sensor..
Was this helpful?
Thank you for voting!
Switch had burned out due to faulty wiring by electrician when appliance first installed
1 of 4 people
found this instruction helpful.
-
Doriss from Cartersville, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
my son simply replaced the switch, so now I have a working oven light once again
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
door glide broken
0 of 1 people
found this instruction helpful.
-
David from Port Orange, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
removed the old ones.then installed the new ones.
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people
found this instruction helpful.
-
peggy ann from forest city, NC
- Really Easy
- Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Light burned out in upper oven
0 of 1 people
found this instruction helpful.
-
Shirley from Las Vegas, NV
- Really Easy
- Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!