My Orders
- Home
- MEMCW301ES
- Instructions
MEMCW301ES (03) Thermador Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven heating temp not turning off at set temp/overheating
9 of 17 people
found this instruction helpful.
-
Jaymie from Intercourse, PA
- Easy
- 30 - 60 mins
-
Screw drivers
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstall
... Read more
ed the wall oven & tested. The temperature is working normal now. Will return the fixing kit.
Read less
Was this helpful?
Thank you for voting!
One of 3 rings on roller ring appeared broken. The turntable was properly revolving.
1 person
found this instruction helpful.
-
Libbie K from NAPLES, FL
- Very Easy
- Less than 15 mins
I lifted up the microwave ceramic dish and put it on countertop. Lifted out old roller ring and replaced with new one. This took 10 seconds. Carefully placed ceramic microwave dish back atop roller ring and aligned its center over stationary part that rose from bottom center of oven. This keeps ceramic plate in place as it revolves.
... Read more
I canceled pending service call from local appliance repair service and saved $99.
Read less
Was this helpful?
Thank you for voting!