Models > MDB9150AWB > Instructions

MDB9150AWB Maytag Dishwasher - Instructions

All Instructions for the MDB9150AWB
466 - 480 of 628
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
grinding
followed your video awesome site thanks
Parts Used:
Discharge Pump Housing Upper Discharge Housing Gasket
  • Kelly from Muskegon, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Rusted bottom rack bowl/plate holder
Rusty part snapped out, new part snapped in! No tools, less than a minute from start to finish
Parts Used:
Front Bowl Tine
  • Katherine from Grand Ledge, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Noisy dishwasher
Took apart per video on Part Select found broken piece. Ordered new part and replaced 4 days later.
Parts Used:
Discharge Pump Housing Upper Discharge Housing Gasket
  • Thomas from Knoxville, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
bottom of basket was broken
replaced basket with a new one, so easy even a cave man could do it.....i think.......
Parts Used:
Silverware Basket - Gray
  • donald from arnold, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
would not pump water in the machine.
look the instrution on line and it worked great.
Parts Used:
Water Inlet Valve - 120V
  • Della from Nauvoo, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
old broken silverware basket
I put the new one in and that was all
Parts Used:
Silverware Basket - Gray
  • Vincent from Laurel Springs, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Heard a grinding noise when the dishwasher was running
I twice watched the 5 minute video on PartSelect on how to repair the Discharge Pump Housing. I disassembled as instructed. One thing I did that the video did not suggest is that I marked the alignment of all parts with a pencil before removing any screws. In the end it only mattered on the main housing that covers the filter. That has to be put back on the way it came off. The repair is complete and for under $50 the dishwasher is running great and quieter than I can ever remember.
Parts Used:
Discharge Pump Housing Upper Discharge Housing Gasket
  • Robert from Key West, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Suspected Door Springs broken
After I got the new springs, I pulled the dishwasher out and the springs were fine but the little plastic piece that attaches the spring to the door was gone. So now I had to order the that piece and wait again.
Parts Used:
Door Spring
  • Charles from Titusville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
spray arm would not stay in place
Just snapped in plastic retainer and works just fine now
Parts Used:
Spray Arm Snap Retainer
  • Gwen from Dallas, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Part worn out, needed to replace
No repair, just an replacement. Would recommend this company for good service.
Parts Used:
Silverware Basket - Gray
  • Ronald from Tulsa, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
weak spray was leaving the dishes uncleaned
removed the lower dish basket; used pliers to undo the lock screw. removed the lower spray arm, transfered heat shields from old part to new, replaced the lower spray arm, hand tightened the lock screw, replaced the lower dish basket....DONE!
Parts Used:
Lower Spray Arm
  • Edward from La Habra, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
The door of my may tag dishwasher fell down
I replace 2 springs in 10 minutes works very nice. thank you.
Parts Used:
Door Spring Linkage Door Spring
  • francesco from teaneck, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Grinding on the drain cycle
Saved me from buying a new dishwasher cost less than $100 completely fixed
Parts Used:
Discharge Pump Housing Motor/Pump Impeller and Seal Assembly Mounting Strip Wheel Wheel Mounting Strip Only - NO Wheels
  • michael from Kennesaw, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The Plastic Wheel Broke From The Mounting Strip
The plastic wheel broke from the mounting strip on the top rack. I removed the top rack, and the broken mounting strip. Just note that one side of the strip needs to be tilted before it can be removed. Clicked in the new wheel and mounting strip. Again, the side requiring you to tilt the strip goes in first. I was good to go in less than ten minutes.
Parts Used:
Mounting Strip Wheel Wheel Mounting Strip Only - NO Wheels
  • LYNN from PUTNEY, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
lack of two wheels
Replacement part has only 6 wheels. The original part has 8 wheels. The lack of the two extra wheels allows the dish rack to get stuck in the space between the inside of the dishwasher and the door. The extra set of wheels allows the rack to bridge the gap. It is a problem even if you put the rack in the other way around only a bit worse to deal with. The part was designed with four sets of wheels for a reason.
Parts Used:
Lower Dishrack with Wheels
  • Michael from Scottsdale, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MDB9150AWB
466 - 480 of 628