MDB7600AWW Maytag Dishwasher - Parts

This door latch (Dishwasher Door Latch Assembly, Door Latch Assembly, Latch Assembly) is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. It is located on the door of your dishwasher, and is mounted on the inner door panel. The door latch can break from material fatigue. If the door is often sl...Read moreammed or opened quickly, the latch may break prematurely. If the door won't open or the door switches won't activate, you will need to replace this part. This latch measures 5 1/2 inches wide, 4 1/2 inches high, 2 1/2 inches deep, is constructed out of plastic and comes in black. The kit includes the black handle, latch, and 2 switches.

This silverware basket is gray in color and measures 8 inches wide by 11-1/2 inches high by 12 inches deep. The silverware basket is used to hold small utensils such as forks, spoons, and knives during dishwashing. The manufacturer has redesigned this part to be a complete, full basket with a handle and covers. The basket comes apart in t...Read morewo pieces if you prefer to place them along the sides of your dishwasher instead of at the front section of your bottom dish rack. To prolong the life of this part, try to place utensils into the holders carefully instead of dropping them in.

This dishwasher door latch helps keep the dishwasher door securely closed during operation while housing the door switches that signal the appliance it is safe to begin a wash cycle. This part is JUST the latch, it does not include the handle. Please see model information to determine if the latch WITH the handle is available for your uni...Read moret. Replacing a faulty latch can help resolve issues such as a door that will not close properly, a dishwasher that will not start, unexpected door opening during operation, water leaks, or intermittent power problems. This assembly includes the latch and switches but does not include the door handle. Installation typically involves disconnecting power to the appliance, removing the inner door panel to access the latch assembly, disconnecting the wiring harness, installing the new latch, and reassembling the door. For a complete repair, inspect the door strike, handle, and related door components for wear or damage and replace them as needed to ensure proper door operation and sealing.

The fold away tine pivot or clip holds the tine rows in place. This part is made of gray plastic and is approximately 3 and a half inches in length. Some dishwasher models will have fold away tine rows, so you can easily accommodate larger items. The fold away tine pivot can be disconnected to fold down these tines. If the pivot is damage...Read mored or missing, the tines will not remain upright when they are returned to that position. Most dishwasher models will have two tine pivots per rack. However, this product is sold individually.

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read moree appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

This genuine inner door foam insulation strip, sometimes known as bottom seal foam, is used to create a waterproof seal that helps prevent leaking from the door area of the dishwasher. The existing insulation strip may leave a sticky residue or leftover disintegrated strip that must be scraped off before installing the new strip. Residue ...Read morecan be scraped off with a putty knife. Be sure to remove all residue and clean surrounding areas of the dishwasher build. It is strongly recommended to check other sealant parts on the dishwasher door such as the door gasket and dispenser grommet to ensure the leaking issue is fully solved.

This is the replacement convertible tine pivot for your dishwasher. It is made of gray plastic and is approximately 4 inches long and 1 inch wide. The convertible tine pivot allows the tine row to either stand up or lay flat, depending on what you want to store in the dish rack. If the tine pivot is broken, the tines will not stand up pro...Read moreperly, and it will need to be replaced. To replace the tine pivot, simply unclip it from the tine row and dish rack and clip the new one into place. This is an OEM part sourced directly from the manufacturer and it is sold individually.

This wheel attaches to the inside of the tub to help guide the track and support the top rack.

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

This part is at the end of the rails to stop your dishrack from being pulled all the way out. Sold individually.