MBV1976AAB Maytag Refrigerator - Instructions

First removed the two screws that hold the flapper door switch in place. Then unplugged door from main unit and removed door. Removed the door gasket. Placed door face down on table and removed about 14 screws to expose the the plug end of the switch assembly.

Plug in the new switch assembly and thread thru hole. Reinstall ... Read more the door panel. Reinstall the gasket. Reinstall the switch cover. Rehang the door and plug to main unit. The machine now properly dispenses cans.

Removed fridge door by opening all the way and lifting up ( don't forgit to unplug wire harness)
Removed all screws on back side holding two faces together, replaced parts.

Door flapper sensor malfunctions and will not dispensense more than 1 without reseting appliance by opening and closing the door. Remove 2 screws by sensor. Remove door seal. Under the door seal remove 14 screws that hold door facing on. plug new sensor cable into board and reassemble. Count on doing every 2 - 3 years. This part is ... Read more destroyed by condensation so consider stocking up on it, who knows how long it will be available.

took unit apart fan not working replace pc broad &fan works fine

1. Unplug power.
2. Removed the screws holding on the access panel on rear of machine.
3. Remove 4 screws holding plastic cover from motherboard enclosure.
4. Replace the transformer and connect wires as they were on the old transformer.
6. Replace the cover with the 4 screws.
7. Replace the access cover.

2 screws on trans one plug in on mother board and the 2 plug in power wires ( easy ) repaired, second time doing it