M79GF MTD Lawn Mower - Parts

This genuine Steering Shaft is designed to fit all the Lawn Tractor models listed below. It features a 5/8" spline and measures 21.86 inches in length, ensuring a precise fit and reliable performance. A common reason for replacement is wear or stripping of the gear on the shaft, which can lead to steering issues. Before replacing the s...Read morehaft, it’s recommended to inspect the Steering Gear Segment (Part #717-0622C) to determine if it also needs replacement. Replacing both components together can help restore smooth and accurate steering.

Genuine OEM Idler Mandrel Pulley Kit which includes: pulley, spacer/washer and a bushing. This part spins the blade on the mower deck of the tractor. The bearing for this pulley is not sold separately. If part is damaged or the bearing inside of it is not spinning freely then this part needs to be replaced.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

The belt keeper attaches to the flat washer and the self-tapping screw. It is an OEM replacement part for lawn tractors made by MTD, Yard Machines, Bolens, Yard Man, and Troy-Bilt. This item is available as an individual replacement part. A socket set might be necessary during the installation of this item. It made of metal and will require replacing if it breaks or bends.

This is a genuine replacement part produced by original manufacturer. It is used in various tractors from MTD, Yard Machines, Bolens, and Yard Man. Flange bearings facilitate spinning axles/shafts and reduce friction. They are a very high wear item that may require replacement often. Sold individually.

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This flat idler pulley is designed to help maintain proper belt tension while reducing vibration and uneven wear in lawn and snow equipment drive systems. Made from durable metal for long-lasting performance, it supports smooth belt routing and consistent operation under regular use. Ideal for replacing a worn or noisy pulley, it helps restore reliable belt engagement and overall machine performance.

This is an original replacement part manufactured for use with riding lawnmowers. The axle end cap covers the ends of the front suspension or pivot bar where the bushings, and axles are inserted. The axle end caps snap into place, they are sold individually.