M54-HN Cub Cadet - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

This metal flange bearing is an authentic manufacturer-sourced component which is designed for use in lawn and garden outdoor equipment. It is bronze in color, with 6 six flat sides, and it has an inner diameter of 0.75 inches, and a height of 1 inch. It also features a protruding circular rim on one end, known as a flange, which keeps th...Read moree bearing stable and secure. The bearing serves as a support mechanism, allowing rotating parts to move smoothly with minimal friction. Over time the bearing may wear down, crack, or fall off causing excessive noise, reduced performance, and potential damage to the snowblower impeller or auger. Use a bearing puller tool to pry the bearing off the equipment. Align the new flange bearing with the mounting holes and secure it in place.

It is an authentic part that is supplied by the original equipment manufacturer for use with lawn and garden equipment. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality socket cap screw is made of durable metal and is sold individually.

This genuine OEM supplied part is specially designed for use with a variety of lawn and garden equipment. It is a standard hardware which may have multiple applications. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this part. This is an identical replacement for ...Read morea missing or a damaged flange lock nut that was installed on a new equipment. One durable metal part is included. A wrench will be needed to secure or remove this hardware.

This genuine OEM fuel tank grommet in your lawn mower provides a secure seal between the fuel tank and the fuel line, preventing fuel leakage. It is located on the fuel tank where the fuel line connects. A broken grommet may be cracked, torn, or deteriorated. It may result in fuel leaks and potential safety hazards. It can also lead to re...Read moreduced engine performance due to air entering the fuel system. To replace the grommet, you will need to remove the fuel tank from your mower and disconnect the fuel line. Pliers and a wrench set will be required for this repair. Please note that the grommet is sold individually, separate from the fuel tank and fuel line components.

This Click Pin (aka a Lynch Pin) is a metal, gold, individually sold pin which can be installed with a screwdriver and socket set. It attaches to the gearbox assembly and will need to be replaced if missing or broken. Customers have determined that this is an easy repair.

NOTE: Battery is not charged and does not include electrolyte or acid.

This metal hose clip is used to securely fasten small-diameter fuel or fluid lines to fittings such as tanks, valves, or carburetors. It provides a tight, vibration-resistant hold to prevent leaks and line slippage during operation. This is a direct replacement for weakened, corroded, or missing clips to restore safe and reliable hose connections.

This is a Genuine OEM Fuel Pump Replacement. It has a Plastic Body. A Fuel pump is used when the Fuel tank is mounted lower than the Carburetor and cannot rely on gravity to carry Fuel through the Fuel line. It is recommended to check for hairline cracks and other damage to the external surfaces of the pump. If it is damaged discard the pump and perform a fuel pump replacement.

This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part it is securing and the equipment in question, but it is generally an easy job according to our customers. Installation requires a wrench or socket.