My Orders
LW1215ER (ASWAUSH) LG Air Conditioner - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken fan axial blade
8 of 13 people
found this instruction helpful.
-
John from HARLINGEN, TX
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Was this helpful?
Thank you for voting!
compressor staying on, even in OFF mode: failed compressor relay on Printed Circuit Board #EBR895407
2 of 3 people
found this instruction helpful.
-
Philip from NEW MARKET, VA
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
PC Board #EBR895407 No Longer Available, replaced with #EBR7773051 - mirror image board, but wires long enough and connections same.
Unit unplugged: slide filter up and out. Remove two phillips screws behind where top of filter was to remove grill (easier done with magnetic screw driver). Remove two phillips screws, one each side, at ... Read more base of cabinet. Slide assembly out of cabinet 6-8". Remove phillips screw(s) on metal control panel housing. With needle nose, rock (2) main female spade connectors left/right until off (easier done with PC board still secured). Remove phillips screw holding plastic base of PC board. Viewing new board control connectors will simplify disconnecting the (3) control plugs. A small straight blade screwdriver can help.
Unit unplugged: slide filter up and out. Remove two phillips screws behind where top of filter was to remove grill (easier done with magnetic screw driver). Remove two phillips screws, one each side, at ... Read more base of cabinet. Slide assembly out of cabinet 6-8". Remove phillips screw(s) on metal control panel housing. With needle nose, rock (2) main female spade connectors left/right until off (easier done with PC board still secured). Remove phillips screw holding plastic base of PC board. Viewing new board control connectors will simplify disconnecting the (3) control plugs. A small straight blade screwdriver can help.
Read less
Was this helpful?
Thank you for voting!
window a/x unit fan broke
6 of 22 people
found this instruction helpful.
-
margaret from CARRIERE, MS
- Really Easy
- 15 - 30 mins
-
Pliers
took apart the fan housing and replaced the fan saving me hundreds of dollars from buying a new unit
Was this helpful?
Thank you for voting!