My Orders
- Home
- LSXC22486S
- Instructions
LSXC22486S (ASTCNA2) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Change filter light came on
7 of 18 people
found this instruction helpful.
-
Ralph from VALLEY SPGS, CA
- Very Easy
- Less than 15 mins
Took out the old and replaced the new filter
Was this helpful?
Thank you for voting!
Water valve stopped working after a power surge
1 person
found this instruction helpful.
-
Dan from PITTSFIELD, ME
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
Unplugged the power cord. Shut off water supply to the refrigerator. Removed the water supply and distribution lines one at a time and reinstalled the new lines as I went along.
Turned water supply back on and plugged the power cord back into the wall outlet. Tested the operation and viola…it works great now!
A great big thank ... Read more you for your professional and well established service.
Turned water supply back on and plugged the power cord back into the wall outlet. Tested the operation and viola…it works great now!
A great big thank ... Read more you for your professional and well established service.
Read less
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 people
found this instruction helpful.
-
Homer from MARION, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 people
found this instruction helpful.
-
Steve from MUKWONAGO, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Was this helpful?
Thank you for voting!
Spring was broken on original unit, had to replace whole lever.
0 of 1 people
found this instruction helpful.
-
Alan from Sun City West, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
removed old lever ( 2 screws ) took apart electrical connection, replaced lever, connected electrical hookup, put in screws. DONE !!!!!!
Was this helpful?
Thank you for voting!