LSWD306ST LG - Parts

The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your applian...Read morece will not heat properly. It is made of metal and is approximately 1 inch in diameter. This part is sold individually. It is recommended to order a spare, especially if you commonly use the self-cleaning function in your oven.

This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.

This halogen lamp is a replacement lighting component designed to provide bright, focused illumination. It is commonly replaced when burned out, dim, or flickering, helping restore clear visibility.

This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner ...Read moreglass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.

This thermostat is a temperature-sensing device that controls and maintains the desired temperature inside the oven. It is an OEM replacement part that works by monitoring the internal oven temperature and signaling the heating elements to turn on or off as needed to maintain the set temperature. You can find the thermostat at the back of...Read more the oven, near the top or bottom. In some ovens, it may be located behind the control panel. Thermostat failure can occur due to wear and tear, electrical issues, or damage. If the thermostat fails, it can result in temperature inconsistencies, such as the oven not reaching the desired temperature or overheating. This can lead to uneven cooking, undercooking, or burning of food. Before beginning this repair, disconnect the oven from the power source to avoid electrical hazards Locate the thermostat and carefully disconnect the wires connected to it. It is advisable to take a picture or label the wires to ensure proper reconnection later. Gently pull out the thermostat from its housing and position the new thermostat in place. Reattach the wires to the corresponding terminals on the new thermostat. Reconnect the oven to the power source and test that the new thermostat is functioning by monitoring the temperature inside the oven.

The control board assembly, also known as the main control board or electronic control board, is a crucial component in an electric range oven. It allows you to control the various functions and operations of the range. It can be found behind the control panel of the range, and it can be accessed by removing the control panel cover. There...Read more are various reasons that can cause the control board assembly to fail such as electrical problems, overheating, wear and tear over time, or mechanical damage. A faulty control board assembly will result in inaccurate temperature readings, malfunctioning timers, and clocks, and difficulty switching the appliance on and off. Before beginning any repairs, ensure the oven is unplugged to prevent electrical accidents. Remove the fasteners that hold the control panel cover and set the cover aside. Carefully disconnect the wiring connectors from the control board and make note of or take pictures of how the wires are connected. Remove the control board from its mounting position and position the new control board in place. Reconnect wiring connectors using your notes/images and reassemble the control panel to complete the repair.