EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

LSC26945SW (ASWCLGC) LG Refrigerator - Instructions

All Instructions for the LSC26945SW
16 - 24 of 24

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The rails for our cheese drawer broke
1 of 4 people found this instruction helpful.
  • wendy from west chester, PA
  • Easy
  • Less than 15 mins
  • Screw drivers
Just unscrew screws from old rails (still in refridgerator ), and screw them into new rails. We tried to order these parts from another online part site and we got the wrong parts. Partselect.com had drawing of our fridge and it was very easy to navigate through the web site. Thank you!
Was this helpful?
Thank you for voting!
Rails broke when overloaded
0 of 1 people found this instruction helpful.
  • James from Bremerton, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed shelf that rails were mounted to. Used a std phillips screwdriver to loosen screws attaching the rails, three per side. Removed damaged rails, lined up new rails and tightened screws. Returned shelf to refrigerator and inserted tray on the new rails.
Was this helpful?
Thank you for voting!
Both guide rails had cracked at the front end I guess do to excessive weight in the drawer.
0 of 1 people found this instruction helpful.
  • Robert from Parkland, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Simply removed the drawer, then removed the shelf above which held the guides, removed the guides ( 3 screws per side )and replaced them.
Was this helpful?
Thank you for voting!
The ice maker door stay open. And not close back.
0 of 2 people found this instruction helpful.
  • Toai from Monroe, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
So easy that my 13 years old son replaced it.
Was this helpful?
Thank you for voting!
Water/ice maker not working
9 of 38 people found this instruction helpful.
  • Brent from ROGERS, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.
Was this helpful?
Thank you for voting!
My ice maker overflowed water and made a mess in the freezer
  • steve from clarence center, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The part was extremely easy to replace. The unit came out with one screw, and I had to unplug the wire connection. After removing I noticed the ice tray was cracked - that's what caused the problem. The new unit went in easily with 1 plug in connection and 1 screw. I was done in less than 10 minutes.
Was this helpful?
Thank you for voting!
Threads were striped on water valve leaked needed new one
  • Nicholas from Melborne, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench set
Shut water valve off drained water in refrigerator instAlled new valve
Was this helpful?
Thank you for voting!
Each time we've had to move we have to remove the doors from the fridge to get it thru the front door.since water and ice run thru the freezer door there are 2 tubes that connect at the bottom of the freezer door that aren't meant to be separated very often if ever.it's easier to cut the tubing on b
  • Sarah from Elk Grove, CA
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers
With alot of elbow grease and a pair of pliars we managed to get the old connector off wo cuttig the tubing as the tubing was getting to short from being cut once to many times & there was no more play in the length.Original connector was a different color and shapped slightly different than the new one so was a bit concerned that I had ordered the wrong part but it went one very easily & did not leak. We even managed to remove it again just to see if it was possible wo cutting again. it came off with no trouble.I would say the replacement part was a better fit than the original simply because we could remove it easily wo having to cut the tube!
Was this helpful?
Thank you for voting!
All Instructions for the LSC26945SW
16 - 24 of 24