- Home
- LSC23924ST
- Instructions
LSC23924ST (04) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water had reached its recommended service life..
4 of 7 people
found this instruction helpful.
-
Willard from COMPTON, CA
- Really Easy
- Less than 15 mins
Closed valve to water supply line; Removed contents of top shelf. Removed top shelf by sliding it out. Unscrewed old water filter and screwed in new filter. Replaced to shelf and contents in reverse order. Opened water supply line.
Was this helpful?
Thank you for voting!
Right side door creaky squeaky annoying
3 of 5 people
found this instruction helpful.
-
Chris from MURFREESBORO, TN
- Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Took off door per normal instructions.
Removed the old stopper and hinge assembly (the hard rubbery parts had worn enough against each other to cause the annoying sound when opening and closing the door).
Inserted the new stopper and hinge assembly.
There was no locking nut on the newer part, so just had to level the fridge ... Read more door without that part of the instructions (from normal LG instructions)
Overall easy for a non-handy person and the annoying sound is gone.
Wife is happier now.
Removed the old stopper and hinge assembly (the hard rubbery parts had worn enough against each other to cause the annoying sound when opening and closing the door).
Inserted the new stopper and hinge assembly.
There was no locking nut on the newer part, so just had to level the fridge ... Read more door without that part of the instructions (from normal LG instructions)
Overall easy for a non-handy person and the annoying sound is gone.
Wife is happier now.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 people
found this instruction helpful.
-
Homer from MARION, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 people
found this instruction helpful.
-
Steve from MUKWONAGO, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Was this helpful?
Thank you for voting!
Spring was broken on original unit, had to replace whole lever.
0 of 1 people
found this instruction helpful.
-
Alan from Sun City West, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
removed old lever ( 2 screws ) took apart electrical connection, replaced lever, connected electrical hookup, put in screws. DONE !!!!!!
Was this helpful?
Thank you for voting!
Recommended change interval for water filter.
2 of 11 people
found this instruction helpful.
-
Willard from COMPTON, CA
- Really Easy
- Less than 15 mins
Remove top shelf. Screw out old filter and install new.
Was this helpful?
Thank you for voting!