LS12 - Parts

This authentic retaining ring is supplied by the original equipment manufacturer for use with Makita power tools. It is an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams for your model to ensure the exact location and the correct application of this part. Keep in mind this hi...Read moregh-quality retaining ring is made of durable metal and is sold individually. You will snap-ring pliers to secure or remove it.

This is an authentic Makita replacement part, sourced from the original manufacturer for use with power tools. The special retaining ring is commonly used to secure a part assembly to a shaft such as an armature and bearing. This retaining ring is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine Makita replacement part that has been sourced from the original manufacturer to used with miter saws, sanders, routers, table saws, chop saws, circular saws, demolition hammers, and reciprocating saws. The plastic strain relief is used to secure the power cord within the housing near the switch. This item is sold as an individual replacement part.

This strain relief is an authentic item that is supplied by the original manufacturer. It is specially designed for use with Makita compound miter saws. The part is secured at the end of the power cord where it connects to the tool. It prevents the cord from bending and cracking. Over time it may wear out or get damaged eventually requiri...Read moreng a replacement. One durable rubber strain relief is included. Check the diagrams of your model for the correct installation of the new part.

This is an original Makita replacement part. The caution label is designed by the manufacturer for use in miter saws. This part is made of paper with an adhesive backing, and is placed on the upper fence on the left and right to provide instructions for safely moving the fence. No tools are required when replacing this item. Simply re...Read moremove the old label, peel off the protective backing, and carefully stick the new label in place. This part is sold individually.

The pointer attaches to the base. This part is an OEM from Makita for use in chop saws, circular saws, and miter saws. It is available as an individual replacement part. This item will need to be replaced and may require a screwdriver during the installation. It is made of metal and will require replacing if it breaks or bends.

This is available as an individual replacement part. The miter scale plate attaches to the turn base and is made out of metal. A screwdriver may be required to replace this part if it becomes bent or broken. This item is an original part from Makita for use in miter saws.

This a genuine Makita replacement part that has been sourced from the original manufacturer to be used with miter saws. The scale attaches to the base of the saw just below the miter table. The scale is used to provide an indication of the miter angle relative to the fence. It is recommended to adjust the saw when installing the scale. This part is priced as a single item.

This authentic manufacturer-sourced pan head screw is made for use with Makita power tools. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. This screw is a standard hardware which may have multiple applications. Refer to the appropriate diagrams for your specific model to ensure the exa...Read morect location and the correct application of this screw. It is made of durable metal and is sold as an individual item. A screwdriver will be needed to secure or remove it.

It is an authentic OEM sourced replacement part designed for use with Makita power tools. This is a standard hardware which has multiple applications depending on your unit, please refer to diagrams for proper application. It is made from strong, durable metal and it is sold individually.

This is a genuine OEM sourced replacement screw. It is specially produced for use in Makita power tools. It has multiple uses depending on the tool. Please make sure to check your equipments diagrams for correct location and applications of this hardware. One pan head screw is included per order. You will need a phillips screwdriver to install or remove this screw.