LS10 - Parts

The center plate is OEM sourced to ensure quality. This metal plate is intended to be used with miter saws from Makita. This item is part of the safety cover and is used to link the cover to the blade case assembly. The center plate may require a hex driver and socket ratchet to install. This item is sold as an individual replacement part.

This is an original Makita replacement part. The vise plate is commonly found on miter saws. This part is made of metal, and is used in the vise assembly to clamp the material in place for cutting. You will require a screwdriver when replacing this part. This item is sold individually. Included in Part Number 122538-6

This is an authentic Makita replacement part. The pointer is designed by the manufacturer for use in miter saws. This part is made of metal, and is attached to the turn base to indicate the angle of the saw blade. You will require a screwdriver when replacing this part. This item is sold individually.

This item has been sourced from the original manufacturer to be used with miter saws from Makita. The slide plate connects to the base assembly. This item fits between the table and the base to provide spacing and to allow the table to pivot easily. This part is priced as a single item, please note three slide plate may be needed.

This is an authentic Makita replacement part that is sourced from the original manufacturer for use with miter saws. The link plate fits next to the compression spring and is made of metal. An allen wrench might be necessary during the installation of this part. Over time this item may break and will need to be replaced. This part is available as an individual replacement.

The center cover fits between the center plate and the torsion spring. This part is an OEM from Makita for use in miter saws. It is made of metal and is sold individually. An allen wrench might be required during the replacement of this part. It may become broken and will need to be replaced.

This is a genuine OEM part. The Makita slide stopper is made for use with several miter saw models. The metal stopper is fastened to the turn base, securing the lock pin. A screwdriver is required for the repair, and the slide stopper is sold individually.

This stopper holder in your miter saw, located in the turn base, is responsible for controlling the movement of the stopper. The stopper is an adjustable feature that allows you to lock the miter saw at specific angles, ensuring precise and consistent cutting. If you find it difficult to adjust or lock the stopper in place, it could be da...Read moremaged or worn out, and it may need to be replaced. To access the turn base for replacement, consult your user guide for disassembly instructions. You will need a screwdriver and a socket or wrench. Separate the upper turn base of the miter saw from the lower base and remove the old stopper. As you reassemble your machine, install the new stopper holder. Please keep in mind that this OEM replacement part is sold separately from the stopper.