- Home
- LRSPC2051ST
- Instructions
LRSPC2051ST (ASTCLGA) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator light not working. If I would flick the button it would go on for a minute but not stay on.
4 of 5 people
found this instruction helpful.
-
Dawn from NORTH BRANCH, MN
- Easy
- 15 - 30 mins
The old switch was a little hard to get out....took me a couple tries. I couldn’t move the frig out to unplug it, so just shut the power off in the kitchen. But, I was happy that’s what the problem was and so happy to have the light back on......it was probably three years it didn’t work!
Was this helpful?
Thank you for voting!
Light doesn’t come on when fridge door opens
4 of 6 people
found this instruction helpful.
-
Lloyd G from QUEENS VLG, NY
- Really Easy
- 15 - 30 mins
Pulled fridge away from wall, unplug electrical connection, open fridge door, use knife to prize out door switch, pull off and replace switch from electrical wiring.
Was this helpful?
Thank you for voting!
interior light switch did not turn off light in ref
4 of 6 people
found this instruction helpful.
-
Timothy from SUSANVILLE, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
pried out old switch, disconnected wires ,placed wires on new switch
Was this helpful?
Thank you for voting!
Water had reached its recommended service life..
4 of 7 people
found this instruction helpful.
-
Willard from COMPTON, CA
- Really Easy
- Less than 15 mins
Closed valve to water supply line; Removed contents of top shelf. Removed top shelf by sliding it out. Unscrewed old water filter and screwed in new filter. Replaced to shelf and contents in reverse order. Opened water supply line.
Was this helpful?
Thank you for voting!
Door switch would not turn on interior refrigerator light.
3 of 4 people
found this instruction helpful.
-
Jane from SHORELINE, WA
- Very Easy
- Less than 15 mins
I had previously watched a YouTube video (do this first!!) on a similar Kenmore model so I knew what to look out for: (1) turned off power, (2) took thin putty knife to slip under outer lip of switch (most screwdrivers are too thick), (3) wiggled switch at front end to release the tab, (4) unplugged from the socket, (5) plugged in new sw
... Read more
itch, (6) popped new switch back into door, (7) turned on power. Voila !! Super easy. I couldn't believe it.
Read less
Was this helpful?
Thank you for voting!
light didn't come on when the door was opened
2 of 2 people
found this instruction helpful.
-
William L from SUMAS, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
I took a very thin bladed screwdriver and took the old part out -carefully.
The new part fit in quite easily.
The new part fit in quite easily.
Was this helpful?
Thank you for voting!
Switch stops working
2 of 2 people
found this instruction helpful.
-
David from PENNSVILLE, NJ
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
Replace with new switch. this is the third switch i have replaced in 10 years. the only part, besides a light bulb, that has gone bad. obviously this is a problem with this model for Kenmore, or just poor switch design.
Was this helpful?
Thank you for voting!
whater valve whith a defected selenoid and water leaks.
2 of 2 people
found this instruction helpful.
-
Albert from NORTHRIDGE, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set, Wrench set
First ,I unplug the refrigerator .
2nd i remove the back cover, clean the dust.
3th disconnect the water line, remove the all valve..
4th unplug all the wires and code ea with a No,remove the water lines
5th replace the valve reconnect the wires and water lines.replace the
back cover at last screw back the w ... Read more ater line.check for water leaks .
i found ease the valve replacement installation.
.Thanks for the video.
2nd i remove the back cover, clean the dust.
3th disconnect the water line, remove the all valve..
4th unplug all the wires and code ea with a No,remove the water lines
5th replace the valve reconnect the wires and water lines.replace the
back cover at last screw back the w ... Read more ater line.check for water leaks .
i found ease the valve replacement installation.
.Thanks for the video.
Read less
Was this helpful?
Thank you for voting!
Replaced hose and it was exactly what I needed.
3 of 5 people
found this instruction helpful.
-
Donald from CLEBURNE, TX
- Very Easy
- 30 - 60 mins
-
Screw drivers
Replaced old hose and installed the new one. Was very simple with the instructions in your email..... step by step, could not of been any similar.... you guys rock
Was this helpful?
Thank you for voting!
Fan Blade Loose
3 of 5 people
found this instruction helpful.
-
Kyle from NEW ORLEANS, LA
- Very Difficult
- More than 2 hours
I paid for the expedited shipping and they sent me a cheap knockoff attempt at the part that had the wrong size hole. So they refunded me the money I paid for the part but not the shipping, and then I crushed the part they sent me with a hammer and threw it away.
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people
found this instruction helpful.
-
shirley from ONALASKA, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
Really Easy
1 person
found this instruction helpful.
-
Daniel from BRONX, NY
- Really Easy
- 30 - 60 mins
-
Screw drivers
Really Easy
Other Parts Used:
Was this helpful?
Thank you for voting!
Light quit coming on when door opened.
1 person
found this instruction helpful.
-
Calvin from Northome, MN
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
Unplug from wall receptacle. Pry switch out with screwdriver while pushing on inner tab. Then disconnect electrical plug.
Was this helpful?
Thank you for voting!
bad switch
1 person
found this instruction helpful.
-
Michael from TONAWANDA, NY
- Easy
- 15 - 30 mins
-
Screw drivers
The 2 minute or so video was not exactly matching the model that we had but the instructions were very good and important. The switch was a little difficult to get out from the side of the refrigerator.
Was this helpful?
Thank you for voting!
Refrigerator would not produce ice or water
1 person
found this instruction helpful.
-
Frank from TRAVERSE CITY, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced water pump assembly, all compression fittings easy to put together
Was this helpful?
Thank you for voting!