LRSC21935SW LG Refrigerator - Parts

The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on when the door is closed, you could have a faulty switch. The switch is spring-loaded and is a generally closed type of switch meaning there should be no continuity...Read more when the button is pushed, and continuity through the switch when it is no longer engaged. This plastic, white, OEM switch is sourced directly from the manufacturer, is sold individually and is easy to replace. The repair usually takes less than 15 minutes and requires a flat-blade screwdriver and needle-nose pliers.

This water tube, or plastic tube, is used in refrigerators and freezers. The tube ensures water is directed to parts of the refrigerator that need it, such as the water dispenser and ice maker. If you find that your current one is leaking or broken in any way, replacing the tube can fix this problem. Make sure to unplug the appliance from...Read more the power source before you start this installation project. Refer to the diagram provided by the manufacturer for further instruction and accurate guidance.

This part is the replacement ice tray for your refrigerator. The tray is made of white plastic and is approximately 9 inches in length, and 3 inches in width. It has the capacity for 8 ice cubes. The ice tray can be filled up with water and is the mold that shapes the ice cubes. If your current ice tray is cracked, warped, or if mineral d...Read moreeposits have settled inside it, it may cause the ice cubes to stick. This part is sold individually and is an authentic OEM part.

This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damaged or shorted, it will cause the ice maker to work inconsistently, or not at all. This switch is different from the water dispenser switch, ...Read morewhich has an entirely different shape all together. Replacing this switch is simple and only requires a Philips-head screwdriver to disconnect the old switch and install the new one. This switch is a genuine OEM LG part and does not come with any other parts or accessories.

This water inlet valve has three solenoid valves and push in fittings. When energized this part releases water from the supply line into the ice mold.

This genuine OEM lever spring exerts tension between the ice maker door plunger and the ice maker itself on your refrigerator. If there is little to no tension holding your ice door seal in place, the spring may be faulty. This spring is approximately 1-inch long. Remember to disconnect the power to your refrigerator before beginning this repair.

This heated ice chute door helps prevent ice buildup and sticking by gently warming the chute opening during dispensing. Designed for smooth, reliable ice delivery, it restores proper operation when ice jams or blockage occur.

The water tube fitting connects lines that supply water to components such as the ice maker and water dispenser.

Restore consistent ice production in your refrigerator with this complete ice maker kit assembly, designed for select LG and Kenmore models. This genuine OEM component includes the ice maker unit and housing, engineered to deliver a reliable supply of ice for everyday use. If your current ice maker is malfunctioning or no longer producing...Read more ice, this replacement offers a dependable solution. Built for durability and precision, the assembly ensures proper fit and function. Installation typically requires basic tools and should be performed after confirming compatibility with your appliance’s model number.

Filters water without removing minerals that are of value to your health, such as fluoride. Lessens the presence of iron, dirt, and rust, among other impurities. This filter needs to be replaced every six months or 500 gallons. It measures 5.6 inches high and 3.3 inches in diameter. To replace, first remove the old filter, which can be ac...Read morecessed by removing the top shelf. Pull it down and turn counter-clockwise to remove. Take your new filter and check to make sure the tabs are in the horizontal position. Now push it into the compartment and rotate it until it is secure. To remove trapped air, run 2.5 gallons of water through the system in cycles of 30 seconds on and 60 second off. If your model has an indicator on the display, push and hold the Filter or Reset button for about 5 seconds to reset.