LRG3095ST (01) LG Range - Overview

Diagrams for LRG3095ST

See every part. Know exactly what you need.

Other

Parts for the LRG3095ST

$52.67

Burner Knob - Stainless Steel

★★★★★

(11)

Part #AEZ73453509

Sold individually. This knob accepts a D-shaped shaft.

$75.13

Temperature Sensor

★★★★★

(3)

Part #EBG61305805

This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more

Read less

$188.36

Oven Igniter

★★★★★

(24)

Part #MEE61841401

This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner....Read more

Read less

$21.45

FOOT

★★★★★

(1)

Part #4778W1N001B

This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is...Read more

Read less

$75.13

CAP,BURNER

★★★★★

(1)

Part #MBL61908604

The burner cap attaches to the top of the burner head and acts like a cover for the burner head. This part helps to protect the burner from spills and helps to even the flame while cooking. The cap is black in color, made of metal, and measures approximately 4” in diameter. Over time the cap may become damaged or even lost and will need to be replaced. This is a genuine OEM burner cap and is sold individually.

$237.14

BASE

★★★★★

(1)

Part #MAM63404404

This oven base plate and bottom heat shield is designed to protect the lower section of the oven from excessive heat while providing structural support for internal components. Positioned at the base of the oven cavity, it helps maintain proper alignment, reduce heat-related damage, and prevent issues such as warping or uneven heat distri...Read more

Read less

$21.45

NOZZLE

Part #MFV61841519

Cap,Burner

★★★★★

(1)

Part #MBL61908503

Burner Cap - Right Rear

Part #MBL61908703

BURNER ASSEMBLY

Part #ABF73329701

$104.33

Burner Cap - Right Front

Part #MBL61909003

$64.69

Power Transformer Assembly

Part #EBJ64465501

The spark module controls the spark for lighting the cooktop surface burners.

Questions And Answers for LRG3095ST

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Kathy - For model number LRG3095ST

September 1, 2022

My 2015 LG gas range is overheating no matter what temp I set it to. Do you know what I can do for this? ie: no matter what temp oven is set to, it heats to 400+ degrees.

Hello Kathy, thank you for your question. The overheating of an oven can be due to is a damaged or loosened thermostat knob. Or, it may be the Thermostat PS11732697 inside your oven as it measures and regulates the heat to ensure that the oven cooks at a consistent temperature without getting too hot. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

$75.13

Temperature Sensor

2 people found this instruction helpful.

Was this helpful?

Linda - For model number LRG3095ST

December 20, 2023

I need wire for contrôle oven

Hello Linda, thank you for reaching out. The wire harness you are looking for is part number PS3533415. If you require assistance to place an order, please contact customer service!

Harness,Single

Was this helpful?

Larry - For model number LRG3095ST

February 21, 2024

Need pt#4775win001D

Hello Larry, thank you for contacting us. The hinge assembly you are looking for is part number PS3617183. If you need help placing an order, customer service is open 7 days a week!

$130.18

HINGE ASSEMBLY

Was this helpful?

William - For model number LRG3095ST

February 2, 2025

Heats up to 100 and then code F11 comes on

Hi William, Thank you for writing. The F11 error code on an LG gas range could indicate a faulty igniter. Other potential causes include a stuck button on the control panel or a faulty temperature sensor. We hope this helps!

$188.36

Oven Igniter

$75.13

Temperature Sensor

Was this helpful?

Common Symptoms of the LRG3095ST

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven wouldn't ignite

11 of 22 people found this instruction helpful.

Martin from KEWASKUM, WI
Easy
15 - 30 mins
Nutdriver

Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process

Was this helpful?

Oven would not light

9 of 26 people found this instruction helpful.

Sheila from HOPKINTON, MA
Very Easy
30 - 60 mins

As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now ... Read more

Read less

Was this helpful?

Both ovens would not light

1 of 2 people found this instruction helpful.

George from Meadows Place, TX
Really Easy
More than 2 hours
Screw drivers

Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts

Was this helpful?