This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner....Read more If your igniter is faulty, you will likely notice that it does not glow, or it glows dimly, the flame is weak, or there is no ignition at all. If the igniter is cracked or visibly damaged in any way it is best to replace it to ensure your safety.
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is...Read more stable. This approximately 2-inch leveling leg is sold individually, so if your range has multiple legs that are broken or missing, consider how many legs you need to order.
Upgrade your oven with this durable gliding shelf rack, designed to provide a stable surface for baking, roasting, and broiling. Its smooth sliding design makes it easy to insert and remove dishes, offering convenience and efficiency during cooking. Built to support heavy cookware, this rack measures approximately 24 3/8" x 16 1/2" and fe...Read moreatures a sturdy construction for long-lasting performance. Cleanup is simple thanks to its smooth finish, making it a practical and reliable addition to your kitchen. Installation is quick—just slide the rack into the designated oven supports for immediate use.
The burner cap attaches to the top of the burner head and acts like a cover for the burner head. This part helps to protect the burner from spills and helps to even the flame while cooking. The cap is black in color, made of metal, and measures approximately 4” in diameter. Over time the cap may become damaged or even lost and will need to be replaced. This is a genuine OEM burner cap and is sold individually.
This oven base plate and bottom heat shield is designed to protect the lower section of the oven from excessive heat while providing structural support for internal components. Positioned at the base of the oven cavity, it helps maintain proper alignment, reduce heat-related damage, and prevent issues such as warping or uneven heat distri...Read morebution. Replacing a damaged or worn base plate helps support safe operation and consistent cooking performance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sherry - For model number LRG3081ST
December 8, 2022
Oven does not heat to proper temperature and does not maintain temperature.
Hi Sherry, thank you for reaching out. You need to check the oven sensor, part number PS6883927, to fix the issue. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
This range is 6 years old and I believe the oven igniter quite again this is going to be the 3rd one in 6 years is this normal the range is set up for lp gas
Hi Martin, thank you for reaching out. According to our research, the oven igniter may last 6 to 8 years with normal gas, while with propane gas it may last 3 to 4 years. So, it is normal. The oven igniter for your model is part number PS3535362. We hope this information helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Andy - For model number LRG3081ST
January 29, 2025
Oven doesn’t work at all, I changed the control board but still nothing
Hello Andy, Thank you for contacting us. It could also be caused by a loose or faulty connection, so we would recommend checking the wiring harness with a multimeter. Good luck with your repair.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Andy - For model number LRG3081ST
January 28, 2025
Oven doesn’t operate at all
Hello Andy, thank you for reaching out. We would recommend making sure that the appliance is receiving proper power. If the problem persists, then you may need to check the control board, part number PS11710554, to solve the problem. A faulty control board can cause the oven to not operate at all. We hope this helps!
Hello Gurvinder, thank you for reaching out. We would recommend checking the electronic control board, part number PS11710554, to fix the issue. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't ignite
11 of 22 peoplefound this instruction helpful.
Martin from KEWASKUM, WI
Easy
15 - 30 mins
Nutdriver
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Was this helpful?
Thank you for voting!
Oven would not light
9 of 26 peoplefound this instruction helpful.
Sheila from HOPKINTON, MA
Very Easy
30 - 60 mins
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now
... Read morewe have a new stove
Read less
Was this helpful?
Thank you for voting!
Both ovens would not light
1 of 2 peoplefound this instruction helpful.
George from Meadows Place, TX
Really Easy
More than 2 hours
Screw drivers
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
My Orders
