LP25940 Murray Snow Blower - Parts

Wire harness adapter kit deflector cont

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Deflector Chute Motor

This 5/16-inch?18 wing nut secures a removable or adjustable part on select lawn and garden equipment. Its winged shape allows it to be tightened and removed by hand. Use the full equipment model number to guarantee the proper fit and location. Check the stud and washer for damaged threads or wear before installation. Start the nut by hand and tighten it firmly, but do not use pliers or overtighten it.

Used to hold a shaft with a mating part, such as a gear, this Woodruff Key is sourced directly from the original manufacturer, is made of metal, is grey, and is sold individually, not as part of a kit or assembly. When this part becomes broken or damaged, it should be replaced. You may notice the mating shaft or gear will no longer rota...Read morete together if the part is malfunctioning. Customers rated this repair as Easy.

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn tractors. The idler pulley applies tension to the belt which then makes the blade to rotate. This part is made of metal and is sold individually. Before installation, disconnect the spark plug wire and make sure the i...Read moregnition key is removed. You will need a socket wrench and an open ended wrench to complete this repair.

This gear case gasket is a genuine OEM replacement designed to seal the auger drive gear case in outdoor power equipment, helping prevent oil leaks while protecting internal gears from moisture, dirt, and debris. Manufactured from durable material suited for high-load and cold-weather conditions, it maintains proper gearbox sealing and in...Read moreternal pressure for smooth, efficient operation. It is an ideal replacement when a worn or damaged gasket causes oil seepage, contamination, or gearbox performance issues, helping extend the life and reliability of the drive system.

This item is available as an individual replacement part. The collar thrust goes between the hub friction disc and the pin-loop. During replacement, it may require a wrench to help install this part correctly. It is made of plastic and will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with Murray and Simplicity snowblowers.

This is an original Briggs & Stratton replacement part. The screw is designed by the manufacturer for use in engines such as those found in snow throwers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to t...Read morehe parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.

Bushing

Pulley-idler 02.75 o

Bushing-1.135idx1.62