LMXS28626S (00) LG Refrigerator - Parts

This front plate assembly, also known as a mullion or flipper, is a genuine replacement part designed for select LG and Kenmore French-door refrigerators. It serves a critical function by sealing the gap between the doors, preventing cold air from escaping and helping maintain consistent internal temperatures. Constructed from durable pla...Read morestic, it supports both the performance and appearance of the appliance. A failing mullion may result in poor sealing, visible gaps, increased energy consumption, and potential food spoilage. Replacing this component can restore proper door alignment and improve overall efficiency. Compatibility should be confirmed using your refrigerator’s model number prior to installation.

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.

This includes the primary and secondary valves along with the wire harness.

This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.

This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damaged or shorted, it will cause the ice maker to work inconsistently, or not at all. This switch is different from the water dispenser switch, ...Read morewhich has an entirely different shape all together. Replacing this switch is simple and only requires a Philips-head screwdriver to disconnect the old switch and install the new one. This switch is a genuine OEM LG part and does not come with any other parts or accessories.

This is a temperature sensor for various models of LG refrigerators. Temperature sensors are used to adjust the level of cooling depending on the internal temperature of the refrigerator. If your refrigerator is warm or not cooling consistently, ensure your evaporator fan is not blocked, before replacing this sensor. To replace this senso...Read morer, you will need a screwdriver and a set of pliers, and simply need to unplug the old sensor, and plug in the new one. This temperature sensor is a genuine OEM part that is sold individually and does not come with any other parts or accessories.

The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.

This refrigerator door handle is a genuine OEM replacement handle supplied directly by LG. OEM parts are guaranteed to fit just like the original part. This handle is made for the freezer portion of the fridge. It has a sleek, ergonomic design that is made to enhance the aesthetics of your fridge while allowing you to comfortably open and...Read more close the door. You will need to replace the handle if it is visibly damaged or can no longer stay attached to the door panel. A prompt repair will prevent damage to the refrigerator and allow you to continue enjoying easy access to your fridge. Mounting hardware is sold separately.

This is a 12V evaporator fan motor assembly designed for use within LG refrigerators. The evaporator fan is used to pull and remove any warm air from the fridge interior over the evaporator coils to cool it. If you notice the evaporator fan in your refrigerator is not running frequently or does not run at all, and your fridge is warmer as...Read more a result, this motor needs to be replaced. This evaporator fan motor is a genuine OEM part that does not come with the necessary fan blade, and simply installs with its single wire harness.