My Orders
- Home
- LMVM2075SW
- Instructions
LMVM2075SW (02) LG Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
light bulb replacement
9 of 31 people
found this instruction helpful.
-
Marianne from CHURCH HILL, MD
- Very Easy
- Less than 15 mins
very simple
Was this helpful?
Thank you for voting!
cover light discolored and cracked
-
JP from Lake Worth, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced with new covers.
Was this helpful?
Thank you for voting!
Light bulb burned out
-
Craig from Burke, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
I unscrewed the light cover, removed the burned out light bulb and replaced it with one I ordered on Partselect.com. It was very easy.
Was this helpful?
Thank you for voting!
tab was broken off when changing bulb
-
Shawn from Seattle, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
removed old cover to lamp and reinstalled the new one by unscrewing one screw and screwing the new one back in
Was this helpful?
Thank you for voting!
Microwave would not heat food, but everything else worked.
-
Samuel from Daleville, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.
Was this helpful?
Thank you for voting!
The unit would nothing no lights no controls
-
James from Tucson, AZ
- Easy
- 1- 2 hours
-
Screw drivers
I checked the incoming power and main fuse. Both are good.removed the microwave from the wall mount, removed the door and outer cover. Removed the right side panel and replaced the main PCB. I found loose mounting screws for the vent fan and other placecs so I tighten all the hardware I could see. Pluged the unit and found the display
... Read more
said input time and date and the lights turned on when the door was opened and the vent worked. installed all covers and checked the microwave operations.
Read less
Was this helpful?
Thank you for voting!