EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

LMV1765ST (CS2ELNA) LG Range - Instructions

All Instructions for the LMV1765ST
16 - 25 of 25

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wanted to see the instructions before I install it.
2 of 5 people found this instruction helpful.
  • Rene from MORENO VALLEY, CA
  • Really Easy
  • 30 - 60 mins
Wanted to see the instructions before I install it.
Was this helpful?
Thank you for voting!
Microwave operated but did not heat
3 of 10 people found this instruction helpful.
  • Donald from Oak Ridge, TN
  • Easy
  • 1- 2 hours
  • Screw drivers
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not fix it and suggested we contact LG for a partial refund. When they tested the unit during re-assembly in my presence, there was a blue flash and the fuse blew. Since we had built a custom tile mural back splash around this unit, I brought it home, ordered a number of time delay fuses new capacitor and two new high voltage diodes. However, using my Fluke DMM, I checked the existing capacitor and high voltage diode and they checked OK so I just replaced the time delay fuse. The high voltage transformer leads had 2 possible ways to connect to capacitor and diode. Tried one way, plugged unit in and turned it on, and immediatly blew the fuse. Replaced the fuse and reversed the high voltage transformer connections,amd turned unit pn, and it worked perfectly. Since we had experienced several power failures during the time of the original failure, the repairer concluded that power spikes might be at fault, so I also purchased a TrippLite ISOBAR4ULTRA 3300 Joule surge protector between wall outlet and microwave, and re-installed over range. It has worked perfectly since.
Was this helpful?
Thank you for voting!
light bulb replacement
9 of 29 people found this instruction helpful.
  • Marianne from CHURCH HILL, MD
  • Very Easy
  • Less than 15 mins
very simple
Was this helpful?
Thank you for voting!
Broken Tray ,Glass
  • Gena from ROSICLARE, IL
  • Really Easy
  • Less than 15 mins
Received my replacement Tray,Glass in only 2 days. Opened it and placed it in the Microwave. Yep, it was that easy!
Was this helpful?
Thank you for voting!
Light bulb burned out
  • Craig from Burke, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I unscrewed the light cover, removed the burned out light bulb and replaced it with one I ordered on Partselect.com. It was very easy.
Was this helpful?
Thank you for voting!
No Heat
  • Dennis from Chesapeake, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1. Removed unit from the cabinet. (2 screws). 2. Remove the outer microwave metal shell. (10 screws). 3. Locate and remove part. (3 screws). 4. Install new part and replace all screws. 5. Install unit back into cabinet. So easy. I will share this site with all of my friends.
Was this helpful?
Thank you for voting!
All Instructions for the LMV1765ST
16 - 25 of 25