LFX28968ST (ASTCNA0) LG Refrigerator - Overview

Diagrams for LFX28968ST

See every part. Know exactly what you need.

Parts for the LFX28968ST

$24.67

Refrigerator Door Switch

★★★★★

(98)

Part #6600JB1010A

The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on when the door is closed, you could have a faulty switch. The switch is spring-loaded and is a generally closed type of switch meaning there should be no continuity...Read more

Read less

$72.73

Refrigerator Water Filter LT700P

★★★★★

(22)

Part #AGF80300702

This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities that can cause ill-tasting water or an unpleasant smell. It reduces sediment, dirt, rust, limescale, sand, and many other contaminants that can...Read more

Read less

$164.47

Refrigerator Front Plate Assembly

★★★★★

(102)

Part #AGU75188619

This front plate assembly, also known as a mullion or flipper, is a genuine replacement part designed for select LG and Kenmore French-door refrigerators. It serves a critical function by sealing the gap between the doors, preventing cold air from escaping and helping maintain consistent internal temperatures. Constructed from durable pla...Read more

Read less

$15.00

Handle Screw

★★★★★

(8)

Part #MJB63190001

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read more

Read less

$56.33

Door Gasket - Gray - Right Side

★★★★★

(41)

Part #ADX73550624

This door gasket is used to make an air-tight seal for the cabinet when the door is closed

$15.00

Door Stopper

★★★★★

(8)

Part #4620JJ2009A

The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening and hitting the side of the refrigerator cabinet. If you find your door hits and scratches your lower cabinet when you open your fridge door, ...Read more

Read less

$23.60

Roller Assembly

★★★★★

(11)

Part #AHJ72909001

This is a drawer roller for the freezer compartment of your LG refrigerator. This roller is made of white plastic, and acts as a wheel to allow the drawer to glide smoothly back and forth when you open and close the freezer compartment. Over time and with further frequent use, this roller can crack, break, or stop rolling smoothly, at whi...Read more

Read less

$51.61

Glass Shelf

★★★★★

(26)

Part #MHL62691504

This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cover and acts as a sort of lid. It also creates a shelf that you can place food and beverages on. If your current shelf insert glass is broken...Read more

Read less

$122.57

Water Inlet Valve Assembly

★★★★★

(16)

Part #AJU72992601

This includes the primary and secondary valves along with the wire harness.

$48.45

Refrigerator Door Basket Assembly

★★★★★

(17)

Part #AAP73631802

This door basket, also known as a bin or shelf, attaches to the interior of your refrigerator door. It is designed for storing jars and bottles, providing easy access to these items. You will find it positioned on the left-hand side of the door, near the bottom. The basket has approximate dimensions of 7 3/4 by 13 inches and can be effort...Read more

Read less

$15.00

Refrigerator Spring

★★★★★

(12)

Part #MHY62044106

This mullion spring is designed for French-door refrigerators to provide tension and stability to the door flap that seals the space between the two doors. Its clockwise winding ensures proper alignment and secure closure, helping maintain a tight seal and consistent internal temperatures. If the mullion is not closing correctly or you're...Read more

Read less

$23.60

Door Holder

★★★★★

(5)

Part #MEG61899901

This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.

Questions And Answers for LFX28968ST

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

John - For model number LFX28968ST

June 6, 2023

I would like to know what wattage my Refrigerator requires to run. I am trying to figure out what generator I need for my home. Could you please advise at your earliest. Thank you.

Hi John, thank you for reaching out. According to our research, your model requires 120 Volts and 15 Amps, or 1800 watts to run. We hope this helps!

2 people found this instruction helpful.

Was this helpful?

Mike - For model number LFX28968ST

December 2, 2021

Hi there, I need to purchase the ice maker assembly but I’m having a hard time finding the right one. I don’t need the auger assembly, just the ice making part. Can you guide me into the right direction?

Hello Mike, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS7788168. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

$179.19

Ice Maker

Was this helpful?

Margaret - For model number LFX28968ST

September 12, 2022

This fridge runs almost constantly and it’s loud.

Hello Margaret, thank you for reaching out. According to our research on the model, the problem appears to be with the Defrost Sensor Assembly, part number PS3636324. Customer service is available 7 days a week if you need help placing an order. We hope this helps!

$45.29

Defrost Sensor Assembly

Was this helpful?

Cathy - For model number LFX28968ST

November 18, 2022

Ice maker knocks and won’t release ice

Hello Cathy, thank you for contacting us. The most probable cause of the issue is a faulty ice bin assembly, part number PS7789317. It stores the ice until needed and comes with an auger that rotates to move the ice into the dispenser chute. We would also recommend inspecting the micro switch, part number PS3529276. It controls dispensing of ice or water when you press the dispenser lever. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.

$31.58

Micro Switch

Ice Bin Assembly

Was this helpful?

Common Symptoms of the LFX28968ST

How this model fails, and the parts that fix it.

Door won’t open or close

Fixed by
these parts

Ice maker won’t dispense ice

Fixed by
these parts

Show All

Ice maker not making ice

Fixed by
these parts

Show All

Videos related to models starting with LFX28968ST

Watch our pros, then fix it yourself.

Replacing the Refrigerator Front Plate Assembly

Replacing the Water Inlet Valve Assembly

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

replace leaking water inlet valve assembly

42 of 75 people found this instruction helpful.

Richard from JACKSONVILLE, FL
Really Easy
15 - 30 mins
Screw drivers

1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new ... Read more

Read less

Was this helpful?

Remove and replace light switch

45 of 89 people found this instruction helpful.

Debbie from Waltham, MA
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers

Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.

Was this helpful?

The factory door gasket was split and needed replacing

22 of 36 people found this instruction helpful.

Carl from LAKE WYLIE, SC
Very Easy
Less than 15 mins

I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.

Was this helpful?