This is a replacement mullion rail for your French door-style refrigerator. You will typically find the mullion rail on the left side refrigerator door. The mullion rail helps to keep the refrigerator door closed. If the door will not close properly or if you notice leaking on your floor, you may need to replace the door mullion. A faulty mullion can gather moisture, resulting in a leak. To replace the mullion, simply disconnect the old mullion from the wire harness and unscrew it. Re-attach the wire harness to the mullion and screw it back into place.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gene B - November 5, 2021
Verified Purchase
Get er Done
My part work’s great
★★★★★
★★★★★
Jeffrey S - February 3, 2021
Verified Purchase
Great response and communication
Easy fix- 5 minutes. Part was exactly what ordered, delivered as promised
★★★★★
★★★★★
JAMES M - August 4, 2021
Verified Purchase
Repair complete
Part was a little different from original but went right on
★★★★★
★★★★★
CLARICE M - August 11, 2021
Verified Purchase
Easy repair, perfect fit
Received new part less than a day after ordering. This was too easy!
★★★★★
★★★★★
Stephen J - December 15, 2022
Verified Purchase
Rapid door repair!
Purchased the replacement part. Removed 2 screws and disconnected the wire clip. Connected the new one…put back the screws…done in less than 5 minutes! All good! Easy transaction and the product arrived on time and as described.
★★★★★
★★★★★
Arlene L - August 15, 2021
Verified Purchase
Easy repair
I repaired my fridge myself using this part. Works perfect and saved lots of money doing it myself.
★★★★★
★★★★★
Michael B - July 28, 2021
Verified Purchase
Easy repair!
The part came fast and took 10 minutes to replace!!
★★★★★
★★★★★
Kirk J - November 20, 2021
Verified Purchase
Easy repair
The party was received and I was able to install the party in a minutes time. Can't imagine how much it would have cost if I hired a repairman!
★★★★★
★★★★★
Daniel G - August 22, 2021
Verified Purchase
As hoped for..........
This part fit perfectly and took 5 minutes to install. So far, just great.
★★★★★
★★★★★
Robert U - February 18, 2021
Verified Purchase
Frig
Perfect!
Better than original!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 18 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door gaskets bad and no ice
Replaced both gaskets on French style doors. Note: left and right gaskets are different part numbers. Had to remove flapper door to change the left gasket and all 3 wires on the flapper were broke. Replaced flapper door. Also found cover on top of the door hinge loose. Has a button on it that tells ice maker door is closed. Shuts off the
... Read more water to the ice maker when door is open. Never knew that! Ice maker is now working again. P.S. gaskets are very easy to change. After removing 2 screws on flapper door, you need to tap it up in order to remove it.
The spring broke on the flapper (mullion) on my refrigerator. I sent a chat message to PartsSelect (they answered right away) to see if they had a replacement spring but it was not available so had to order the whole mullion. They gave me the part # I would have to order. It arrived quickly. The new mullion didn’t have a visible sprin
... Read moreg but it worked the same if not better. I just had to remove 2 screws on the center plate on the existing mullion, pull the plate out enough so you will be able to slide the mullion (the wires are under the plate kind of like the ones you see on a ceiling smoke detector) but you can’t get under the plate until you release the mullion. Push up on the mullion so that the plastic tabs on the top and bottom are released. Once the mullion is released (you have to hold it), you’ll see the wires. Unhook the wire part by just pushing down on the little tab and remove it. To install the new one, just reverse the steps. Align the top and bottom plastic tabs to fit into the slots, just enough to hold it in place. If the plastic tabs are not already flipped out, you’ll have to just flip them out. The top tab does not have tension but the bottom tab has tension so just push on it with your finger to flip it out. The plate covering the electrical is a rather tight fit and you have to make sure the little tab on the inside of the plate is above and behind the tab on the inside where the wires are so it slides behind it so you can get it in position before sliding the mullion back down into place and the electrical plate is in place too. Then screw the 2 screws back in. The hardest part is holding the mullion while un-attaching the electrical and just make sure you stuff the wires in enough so you can get the plate back in position. I’m a 75 yr old woman and managed fine by myself. At first when installing the new one, I couldn’t slide the mullion down enough to get the electrical plate in position and then realized I had to have the little tab inside the electrical plate behind the tab inside the wire compartment so they didn’t hit one another when pushing the mullion back down. Then, all went fine.
Read less
Sonia from CALIF CITY, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.
Followed Youtube video provided on the PartsSelect Website:
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
Robert from WARREN, RI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring on door Mullion broke
Watched a YouTube video on how to replace the door flipper (mullion). Very easy to unscrew the plate and disconnect the electrical circuit. Then gently slide up the flipper and replace with a new one.
Patrick from AUGUSTA, WV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plate Assembly Spring Broken
Remove 2 screws holding to door. Slide assembly up. Unplug connector. Remove old Plate Assembly. Do reverse to reinstall. Plug connector. Push in wires. Slide plate on. Fasten screws. Done
Jim from WELLINGTON, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spring on the mullion was broken so the mullion would not open to seal the other door.
I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.
JANET from GRAND JCT, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spring on flapper door
Unplugged the frig and removed two phillip screws on flapper door of left door... Unplugged the electrical connector and removed flapper... Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...
Richard from IMPERIAL, CA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Plate Assembly Not Closing Properly
Found the part on Parts Select. Ordered the part, which came quickly. While waiting for delivery. I watched a short video on how to replace this part. I'm a 73 yr. old female, and no trouble at all. I really felt a sense of accomplishment. Thank you Parts Select.
Brenda from WEATHERFORD, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old part did not seal properly
Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.
Donald from MERRITT IS, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Removed old part.
Installed new one.
Steve from NORTH AURORA, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandra
November 21, 2021
Is the mullion flap suppose to open or stay flat when the door is closed? We installed a new one and the flap stays flat against the mullion. Thought it would have opened to seal the opening between the two doors.
For model number LFX25978st/00
Hello Sandra, thank you for writing. We have researched the model you have provided and have found a video for PS12374439. The video shows exact positioning for you. We hope to hear from you soon.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Butch
July 20, 2021
What is the dimensions of the door latch.
For model number 7951033010
Hello Butch, Thank you for the question. The Front Plate is about 37" Long. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
October 14, 2021
The photo looks like this part has a gray colored front surface. Is there a version in white?
For model number LFX25978SW/00
Hello James, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11708993 for the White Flipper Assembly. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Vivian
October 16, 2021
Do you know if this mullion will fit this 2 door, bottom freezer model with manufacturing date of 2013?
For model number 795.71033
Hello Vivian, Thank you for your inquiry. We have researched the partial model number you have provided and as there are two versions beginning with this model number, we show two different part numbers for the mullion. This mullion will fit model number 79571033010, and for model 79571033110 the part number for the mullion assembly is PS11708993. We do not receive the manufacturing dates from the manufacturer, so we would advise checking for the complete model number or checking with the serial number for the date. We hope this helps.
Looking to replace the door flapper. Can you confirm the correct part number?
For model number LG lfc25765sw /00
Hi Mark,
Thank you for your question. The part number listed under your model number for the door flipper assembly is PS11708993. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
September 16, 2021
Left door plate assembly does not spring into place to allow for hands free door closure
For model number LFC25765ST
Hello Mark, thank you for writing. You have chosen the correct part for your model LFC25765ST. The Front Plate Assembly is PartSelect Number PS12374439. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dale
October 23, 2023
What is the part number for the door mullion for this model with stainless exterior
For model number LFX25778
Hello Dale, Thank you for your inquiry. Researching your model, we confirm that PS12374439 is the compatible stainless door mullion. We hope this helps
1 person found this helpful.
Was this helpful?
Thank you for voting!
Martie
January 31, 2024
Is the wire harness in the door mullion replaceable or do I need to buy the entire door flap?
For model number LFX25974ST
Hi Martie, thank you for reaching out. The wire harness in the flipper assembly does not come separately. You may need to order the complete flipper assembly, part number PS12374439. If you need help placing an order, customer service is open 7 days a week!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jorge
June 6, 2024
One of the small white plastic holders on the left door, that hold the plate assembly at the top and bottom (the flapper door), where you slide the flapper door into for assembly from above, is broke. Is there 1) a name for this part? 2) is it replaceable 3) if unable to find, could a flathead screw go in there to hold the top of the flapper in place?
For model number LMX25986ST
Hi Jorge, thank you for reaching out. The part you are referring to is the mullion hinge mounting tab. It does not come separately. It comes as a part of the door assembly, part number PS8748970. You may need to replace the door assembly to fix the issue. We hope this helps!
Is it possible to get the 2 Mullion clips that are in the door? I replaced the mullion but the clips in the door are broken.
For model number Kenmore Elite 79571033010
Hi Bowman, thank you for reaching out. The clips you are referring to that hold the mullion comes with the door assembly. They do not come separately. You may need to replace the door assembly, part number PS3639026. We hope this solves your problem!
