- Home
- LFX25975SW
- Instructions
LFX25975SW (03) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Switch stops working
2 of 2 people
found this instruction helpful.
-
David from PENNSVILLE, NJ
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
Replace with new switch. this is the third switch i have replaced in 10 years. the only part, besides a light bulb, that has gone bad. obviously this is a problem with this model for Kenmore, or just poor switch design.
Was this helpful?
Thank you for voting!
light didn't come on when the door was opened
2 of 2 people
found this instruction helpful.
-
William L from SUMAS, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
I took a very thin bladed screwdriver and took the old part out -carefully.
The new part fit in quite easily.
The new part fit in quite easily.
Was this helpful?
Thank you for voting!
Ice crystals appearing on the face of the freezer draws
2 of 2 people
found this instruction helpful.
-
Craig from SPRING HILL, FL
- Really Easy
- Less than 15 mins
Part Select had a great video which made the repair easy, using a putty knife to start removing the freeze door gasket. Once removed the install is simple just snap the new gasket into the track, but start at the corner. Other company's have a video requiring you to remove the entire freezer compartment out of the appliance, unnecessary w
... Read more
aste of time and labor.
Read less
Was this helpful?
Thank you for voting!
LED’s we’re not working only 2 we’re lit
2 of 3 people
found this instruction helpful.
-
Alan from MADISON, ME
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove 2 screws swing light down a little bit and pull it to front unplug wires . The hard part of job was finding new replacement light, Partselect.com was only sight I could find that had new replacement number and had the light . Other sites including LG site would only tell me the part number on old lights was discontinued 2 of sites
... Read more
said try used appliance dealers
Read less
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people
found this instruction helpful.
-
Johnny from MOUNT OLIVE, AL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people
found this instruction helpful.
-
shirley from ONALASKA, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
the ice bin was extremely easy to set in....no explanation necessary however, The customer service left a lot to be desired!
1 person
found this instruction helpful.
-
Charles from CHATTANOOGA, TN
- Really Easy
- 30 - 60 mins
The ice bin I ordered did not arrive on time and, when tracking indicated it was delivered, it was not here. I notified customer service and was told that they would cancel that order and I could order again.and make a payment, to include shipping, again and I would be reimbursed. Two days later the first order showed up. I notified cu
... Read more
stomer service that the item had shown up and I installed it therfore requested the second order be deleted. Was told that it was already enroute and they would send me necessary paperwork to return it. upon receipt of the paperwork I followed the instructions bur, when I contacted UPS (as directed) was advised that I would have to pay shipping of about $19. unless Partselect requested and paid for shipping and sent me the shipping label. I received the shipping label but, when I contacted UPS was advised that I would stoll have to pay to have the item picked up at my house and, unless I wanted to pay that cost I should deliver the package to a UPS pick up location........all the way across town through heavy traffic, about 25 miles. I should have kept the second bin along with the first, given it away or thrown it away and the cost would have been re imbursed. Trying to do the right thing, I was responsible for additional cost and aggravation .......Thanks a lot!!!!
Read less
Was this helpful?
Thank you for voting!
Water dispenser not working
1 person
found this instruction helpful.
-
Michael from BRAINTREE, MA
- Really Easy
- 30 - 60 mins
Removed back panel and water inlet valve and replaced with a new water inlet valve
Was this helpful?
Thank you for voting!
The switch became intermittent - Possibly a poor designe
1 person
found this instruction helpful.
-
Sidney from ENDICOTT, NY
- Very Easy
- Less than 15 mins
-
Screw drivers
Used a small screw driver inserted into the front of the switch (facing the front) and pried until the switch was coming out. When out, I removed the connect harness and replace the switch with a new one.
Was this helpful?
Thank you for voting!
Part was delivered broken
1 person
found this instruction helpful.
-
Karen from GEORGETOWN, TX
- Very Difficult
- More than 2 hours
The past I ordered was broken upon delivery. I asked for a replacement and was refunded the charge. Tried to contact you but "due to covid" you aren't taking calls. Net result: I ordered the part from another source, got it, installed easily. Won't use you again.
Was this helpful?
Thank you for voting!
Butter bin door had broken
1 person
found this instruction helpful.
-
Mary from DEL MAR, CA
- Really Easy
- Less than 15 mins
Simple replace of door, fits perfectly
Was this helpful?
Thank you for voting!
replace refrigerator ice bin because old bin would not dispense ice.
1 person
found this instruction helpful.
-
Kathy from PORTER, TX
- Very Easy
- Less than 15 mins
Slid new bin into place. It works perfectly now.
Was this helpful?
Thank you for voting!
Freezer door gasket needed replacing.
1 person
found this instruction helpful.
-
Stephen from DICKINSON, TX
- Really Easy
- Less than 15 mins
-
Pliers
Simply removed old gasket. Started in a corner with installing the new gasket. It went in easily and quickly.
Was this helpful?
Thank you for voting!
Plastic bracket holding freezer drawer broke off
1 person
found this instruction helpful.
-
Terry from Broken Arrow, OK
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed upper drawer/basket from freezer
Removed 2 Philips screws
Removed rail bracket assembly
Reinstalled reversing those steps
Works like new.
Happy wife. Happy life. FYI- I am nearly 77 yrs young.
Removed 2 Philips screws
Removed rail bracket assembly
Reinstalled reversing those steps
Works like new.
Happy wife. Happy life. FYI- I am nearly 77 yrs young.
Was this helpful?
Thank you for voting!
door slight switch failed
1 person
found this instruction helpful.
-
Greg from CASA GRANDE, AZ
- Really Easy
- Less than 15 mins
-
Pliers
Covered the sidewall with tape to protect. Pried the switch out with knife blade and removed electric plug with needle nose pliers. placed plug in new switch and pushed switch into the hole in the side wall. Took about five minutes.
Was this helpful?
Thank you for voting!