EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

LDS5811BB (ABPEEUS) LG Dishwasher - Parts

1 - 12 of 123

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hinge Cable – Part Number: 4933DD3001B
$28.55
In Stock
Hinge Cable
★★★★★
★★★★★
(30)
Part #4933DD3001B
This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too quickly. This part contains two plastic pieces which are approximately 2 inches in length by 3/4-inch in width, as well as a rope portion that measures approximately 8 inches in length. When beginning this repair, be sure to use caution when replacing the door hinge cable. The spring to which the door hinge cable attaches is under tension and could snap. This part is sold individually.
Dishwasher Roller Assembly – Part Number: 4581DD3003C
$23.05
In Stock
Dishwasher Roller Assembly
★★★★★
★★★★★
(16)
Part #4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
Roller with Axle – Part Number: 4581DD3002A
No Longer Available
Roller with Axle
★★★★★
★★★★★
(10)
Part #4581DD3002A
The rack roller and axle in your dishwasher allows the dish rack to slide in and out effectively.If you notice that your dish rack is not performing this function, or if one or more of your rack rollers are damaged, you should consider replacing it. The roller attaches to the dish rack with the axle, both are included in this part. This part is gray in color, and measures 1 inch in diameter. With the axle, this part is approximately 1-1/2 inches wide. To access the rack roller and axle, you will need to remove the top dish rack from your dishwasher.
MOTOR ASSEMBLY,AC,PUMP – Part Number: EAU61383518
$121.09
In Stock
MOTOR ASSEMBLY,AC,PUMP
★★★★★
★★★★★
(3)
Part #EAU61383518
On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water during operation. If you notice your appliance is not draining properly, the circulation pump motor may need to be replaced. If this part is for your washer, you may notice your clothes are not cleaning properly. In your washer, to access this part you will need to remove the entire front panel. The circulation pump is 120 volts and 30 watts. The part is white in color and is sold individually. This OEM part comes directly from the manufacturer.
Gasket – Part Number: 3920DD3005H
$78.60
In Stock
Gasket
★★★★★
★★★★★
(14)
Part #3920DD3005H
This dishwasher door gasket is designed to form a secure, watertight seal around the tub, preventing leaks and enhancing overall wash efficiency. Constructed from flexible, heat-resistant black rubber, it withstands temperatures up to 150°F and resists wear over time. By maintaining a tight seal, the gasket ensures that water and steam remain contained within the dishwasher during operation, contributing to more effective cleaning cycles and reduced energy waste. A worn or damaged gasket can lead to water pooling, inefficient washing, and potential damage to surrounding cabinetry. Replacing it restores proper function and helps extend the appliance’s lifespan. Installation is straightforward, requiring the gasket to be pressed into the door channel for a snug fit.
Basket Assembly – Part Number: 5005DD1001B
$44.23
In Stock
Accessory Assembly – Part Number: 5001DD4001A
No Longer Available
Accessory Assembly
★★★★★
★★★★★
(5)
Part #5001DD4001A
This is an accessory assembly, otherwise known as a mounting bracket kit, for a dishwasher. This kit includes two brackets, a hose clamp, and two screws. The brackets are perforated so they can be cut or broken to the desired length if they stick out from underneath the countertop. The accessory kit is used to mount the dishwasher to the side of the cabinet or underside of the countertop, depending on your appliance. This kit can be used with both top or side mounting applications. Be sure to use work gloves when completing this repair to avoid injury. This is a genuine replacement part.
Drain Hose Assembly – Part Number: AEM69493807
$54.95
In Stock
Drain Hose Assembly
★★★★★
★★★★★
(2)
Part #AEM69493807
Carry dirty water out of the dishwasher with this drain hose assembly. It connects the drain pump to the household drain or garbage disposal, providing a contained path for wastewater after washing and rinsing. Cracks, worn connections, or a collapsed section may cause leaks, slow draining, or standing water in the tub. Replacing a damaged hose helps restore proper drainage and protect the floor from spills. Disconnect electrical power before replacement, and follow the included directions for routing and any required inlet updates. This is an OEM part sourced directly from the manufacturer.
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
$62.65
In Stock
Diverter Motor - 120V 60Hz
★★★★★
★★★★★
(7)
Part #4681ED3001D
Wash water reaches different spray arms through a diverter mechanism driven by this dishwasher diverter motor. The motor rotates the mechanism to change the water path during the wash cycle, directing spray where it is needed. A failed or stalled motor may prevent switching between spray zones, leave dishes poorly cleaned, or trigger a diverter fault message. Replacing a faulty motor helps restore controlled water distribution and normal spray arm operation. It mounts beneath the tub and responds to signals from the dishwasher controls. This is an OEM part sourced directly from the manufacturer.
Hinge Spring – Part Number: 4970ED4004D
$35.33
In Stock
Dishrack Upper – Part Number: AHB32983761
$213.78
In Stock
Dishrack Upper
★★★★★
★★★★★
(6)
Part #AHB32983761
This dishwasher upper rack holds glasses, cups, bowls, and other small dishes in place during the wash cycle. Its spaced tines help keep items separated so water can reach their surfaces and drain away. The dark grey coating protects the metal frame and provides a smooth surface for loading dishware. Broken tines, peeling coating, or rust may leave dishes poorly supported. Replacing a damaged rack restores organized loading space and helps keep items steady while the dishwasher washes and rinses them. This is an OEM part sourced directly from the manufacturer.
Tub Seal – Part Number: 3920DD3002B
No Longer Available
Tub Seal
★★★★★
★★★★★
(3)
Part #3920DD3002B
This sound dampening door seal creates a watertight barrier around the dishwasher door, preventing leaks and keeping moisture, heat, and odors contained inside the appliance. In addition to sealing, it acts as an insulation layer to reduce noise and vibration during operation, ensuring a quieter kitchen environment. Made from durable materials for long-lasting performance, this seal is designed to fit specific dishwasher models and restore proper function when the original gasket is worn or damaged. Common signs of failure include visible leaks, musty odors, or a door that doesn’t close tightly. Installation is simple—remove the old seal and press the new one into place for a secure fit.
1 - 12 of 123