LDPS6844AS (ASSESNA) LG Dishwasher - Parts

The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for mor...Read moree security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.

This holder, also known as a mounting bracket, is responsible for securing the dish rack in place inside your dishwasher during cleaning. It is a genuine OEM replacement part sourced directly from LG to ensure a perfect fit for your dishwasher. It is gray in color and measures 1 inch by 1 inch. If the holder is lost or broken, your dish r...Read moreacks may become dislodged or unstable and cause damage inside the dishwasher. Each holder is sold individually.

This is a dishrack holder designed for various models of LG dishwashers. The purpose of this holder is to secure various parts within the dishwasher, such as the cutlery basket. This holder measures approximately 1 inch long and 0.4 inches wide, is made of plastic, and features two hooks that attach themselves to the frame of the rack. Th...Read moreis genuine OEM holder comes as an individual part, so if you require multiple holders, consider that before ordering.

Wash water reaches different spray arms through a diverter mechanism driven by this dishwasher diverter motor. The motor rotates the mechanism to change the water path during the wash cycle, directing spray where it is needed. A failed or stalled motor may prevent switching between spray zones, leave dishes poorly cleaned, or trigger a di...Read moreverter fault message. Replacing a faulty motor helps restore controlled water distribution and normal spray arm operation. It mounts beneath the tub and responds to signals from the dishwasher controls. This is an OEM part sourced directly from the manufacturer.

Control water entering the tub with this dishwasher water inlet valve assembly. Its electric coil opens the valve when a cycle calls for water, then closes it to stop the flow. A worn or failed valve may cause slow filling, prevent the dishwasher from filling, or allow water to seep into the tub while the appliance is off. Replacing a fau...Read morelty valve helps restore proper filling and shutoff. Disconnect electrical power and turn off the water supply before removing hoses or wiring. This is an OEM part sourced directly from the manufacturer.

Keep adjustable rack tines securely positioned with this dishwasher tine row holder. The molded plastic clip attaches to the rack framework and anchors the tine row, helping plates and bowls stay properly spaced during washing. Cracks, worn retaining surfaces, or a missing clip may allow tines to shift, rattle, or collapse under loaded di...Read moreshes. Replacing a damaged holder helps restore stable dish support and orderly loading. Empty the rack before installation, remove loose plastic fragments, and snap the replacement gently into place without forcing the retaining tabs. This is an OEM part sourced directly from the manufacturer.

This micro switch detects specific positions or actions within the appliance and signals components to activate or stop accordingly. Designed for precise response, it is replaced when functions fail to trigger or operate inconsistently.

This LG Dishwasher rack holder, also known as a tine row retainer, is compatible with various models of LG dishwashers. It is designed to secure the tine row to the dishrack to ensure it does not move around when the dishwasher is in use. This ensures that your dishes and utensils are stable and do not fall and break, or damage the interi...Read moreor of the dishwasher. It is normal for the rack holder to break or become dislodged over time. Simply snap the new one into the appropriate place and check that the tine row is stable before resuming the use of your dishwasher.

This rack is a replacement support component designed to hold cookware or items securely at adjustable heights. It promotes safe handling and space efficiency and is commonly replaced when bent, rusted, or unstable.

Direct wash water to the upper spray arm with this dishwasher guide assembly. It connects the spray arm to the rear feed tube and helps maintain a sealed water path for effective spraying. Cracked housing, damaged mounting tabs, or worn seals may reduce water pressure, limit spray arm rotation, or leave upper-rack dishes poorly cleaned. R...Read moreeplacing a faulty guide helps restore proper water delivery. Disconnect appliance power before installation, handle retaining clips gently, and confirm the spray arm turns freely and the rack seats fully after reassembly. This is an OEM part sourced directly from the manufacturer.