LDFC2423V (APZEEUS) LG Dishwasher - Parts

The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for mor...Read moree security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.

This holder, also known as a mounting bracket, is responsible for securing the dish rack in place inside your dishwasher during cleaning. It is a genuine OEM replacement part sourced directly from LG to ensure a perfect fit for your dishwasher. It is gray in color and measures 1 inch by 1 inch. If the holder is lost or broken, your dish r...Read moreacks may become dislodged or unstable and cause damage inside the dishwasher. Each holder is sold individually.

This is a dishrack holder designed for various models of LG dishwashers. The purpose of this holder is to secure various parts within the dishwasher, such as the cutlery basket. This holder measures approximately 1 inch long and 0.4 inches wide, is made of plastic, and features two hooks that attach themselves to the frame of the rack. Th...Read moreis genuine OEM holder comes as an individual part, so if you require multiple holders, consider that before ordering.

This dishwasher door gasket is designed to form a secure, watertight seal around the tub, preventing leaks and enhancing overall wash efficiency. Constructed from flexible, heat-resistant black rubber, it withstands temperatures up to 150°F and resists wear over time. By maintaining a tight seal, the gasket ensures that water and steam re...Read moremain contained within the dishwasher during operation, contributing to more effective cleaning cycles and reduced energy waste. A worn or damaged gasket can lead to water pooling, inefficient washing, and potential damage to surrounding cabinetry. Replacing it restores proper function and helps extend the appliance’s lifespan. Installation is straightforward, requiring the gasket to be pressed into the door channel for a snug fit.

This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, managing the flow of water to these spray arms. This diverter motor runs on 120 volts and 60 Hz. When this motor fails, the dishwasher will ...Read morenot wash or drain properly. Please keep in mind that this genuine OEM replacement part is sold separately from the spray arms.

This LG drain hose assembly is a genuine OEM replacement that is compatible with various LG washers. The assembly includes the hose and plastic connectors. The flexible rubber hose transports used water from the washer tub out into a dedicated drainage system such as a laundry sink or standpipe. The drain hose may become clogged, dislodge...Read mored, or damaged by loose items like coins in the laundry or by hard impacts from outside. If the hose is faulty, you will likely notice standing water in the washer tub after a cycle, mold growth, leaking, or water overflow. It is recommended to replace the drain hose promptly if it is faulty to ensure the proper functioning of your washer.

This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slow...Read morely, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.

This pump casing assembly is compatible with various models of LG dishwashers. This assembly contains various components of the dishwasher pump. The pump is responsible for circulating water through the dishwasher during different cycles, such as washing and draining. The components included are the motor which provides the power that mov...Read morees the water; the impeller, which helps to expel the water through the spray arms; the seals, which help to prevent water from leaking out, and the inlet and outlet ports which are responsible for pulling water from the tub and directing it outwards as needed; and finally, the outer housing. If any of these components fail, your dishwasher will have difficulties draining, dishes will not be cleaned thoroughly, and there will be grinding and buzzing noises during use.

This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clips directly onto the rack to prevent tines from loosening or shifting, helping maintain proper spacing for plates, bowls, and cookware. A wor...Read moren or broken retainer may cause the rack to feel loose or rattle during operation, making replacement necessary for smooth performance. Installation is quick and simply involves attaching the clip to the designated spot on the rack to restore proper support.

This micro switch detects specific positions or actions within the appliance and signals components to activate or stop accordingly. Designed for precise response, it is replaced when functions fail to trigger or operate inconsistently.

This is the lower dishrack assembly for various models of LG dishwashers. This dishrack assembly features a 24-inch long and 21-inch wide dishrack, featuring an assortment of pegs to organize dishes, and wheels underneath to easily slide the dishrack in and out of your dishwasher. If your current dishrack is warped, missing pieces, or dam...Read moreaged in any way, it should be replaced immediately to continue to support your dishes fully. This dishrack is an OEM part that is sold individually and does not come with any other parts or accessories, such as cutlery baskets or securing hooks.