LDF7551ST (ASTEEUS) LG Dishwasher - Parts

This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too quickly. This part contains two plastic pieces which are approximately 2 inches in length by 3/4-inch in width, as well as a rope portion that measures approxima...Read moretely 8 inches in length. When beginning this repair, be sure to use caution when replacing the door hinge cable. The spring to which the door hinge cable attaches is under tension and could snap. This part is sold individually.

The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for mor...Read moree security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.

The door spring, used in dishwashers, adds tension to the door through the door hinge to keep it from opening too fast. If you have a door latch failure or your washer door drops too quickly when opened, it is best you replace this part to fix the problem. Refer to the manual provided by the manufacturer for installation instructions and ...Read morefurther repair guidance. Unplug your dishwasher from the power source before you begin this repair project as a safety precaution.

This dishwasher door gasket is designed to form a secure, watertight seal around the tub, preventing leaks and enhancing overall wash efficiency. Constructed from flexible, heat-resistant black rubber, it withstands temperatures up to 150°F and resists wear over time. By maintaining a tight seal, the gasket ensures that water and steam re...Read moremain contained within the dishwasher during operation, contributing to more effective cleaning cycles and reduced energy waste. A worn or damaged gasket can lead to water pooling, inefficient washing, and potential damage to surrounding cabinetry. Replacing it restores proper function and helps extend the appliance’s lifespan. Installation is straightforward, requiring the gasket to be pressed into the door channel for a snug fit.

This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, managing the flow of water to these spray arms. This diverter motor runs on 120 volts and 60 Hz. When this motor fails, the dishwasher will ...Read morenot wash or drain properly. Please keep in mind that this genuine OEM replacement part is sold separately from the spray arms.

This is the lower dishrack assembly for various models of LG dishwashers. This dishrack is an OEM part that is designed to hold dishes and cutlery during the wash cycle of the dishwasher. This dishrack is made of a coated metal to prevent rusting, cracking, and peeling. However, over time and through further exposure to hot temperatures f...Read morerom the heating element, the coated material of the dishwasher rack can begin to peel, at which time it needs replacing. This dishrack comes as an individual part and does not come with any other parts or accessories, such as its accompanying cutlery basket.

This corrugated drain hose assembly directs wastewater from your dishwasher to the household drainage system. Positioned at the rear of the unit, it connects the pump to the sink drain or garbage disposal. If the hose becomes damaged or punctured, you may observe water leakage beneath the dishwasher or standing water within it. Please kee...Read morep in mind that this genuine OEM replacement part is sold separately from the drain pump.

The upper dishrack assembly is an essential component of your LG dishwasher, designed to hold dishes securely in place during the dishwashing cycle. This genuine OEM replacement part is manufactured to meet the highest quality standards, ensuring durability and a perfect fit for select LG dishwasher models. Crafted with precision, this up...Read moreper dishrack provides ample space and an organized structure for plates, glasses, bowls, and other items, optimizing the cleaning process. Before purchasing, confirm compatibility with your dishwasher model to ensure the correct fit, as slight variations in size and shape may exist between models. This genuine LG component is stocked and ready for quick shipment, so you can restore your dishwasher's performance with minimal downtime.