EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

L3B325GL2 General Electric Range - Instructions

All Instructions for the L3B325GL2
16 - 30 of 38

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The control knob stem broke off when I moved the stove.
3 of 10 people found this instruction helpful.
  • Jonathan from Harvard, MA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I located and removed 2 sets of hex-head screws under the front lip of the cooktop, then lifted the entire cooktop to access the burner controls. Removed the wires and taped them, and took out the old control after removing 2 phillips head screws. Installed replacement part easily. Only tricky part is that the various shaft adapters do n't quite work with my knob. I'll fix it completely with a bit of epoxy and the adapters they sent.
Was this helpful?
Thank you for voting!
Slot to small
0 of 1 people found this instruction helpful.
  • Lori from Waterford, WI
  • Really Easy
  • Less than 15 mins
What I had to do was open the slot for the burner pan more as it would not fit properly in. So we snip the burner pan a little and now it fits great.
Was this helpful?
Thank you for voting!
Blackened and rusted drip bowls on range.
0 of 1 people found this instruction helpful.
  • Rachel from Franklin, TN
  • Really Easy
  • Less than 15 mins
Pulled out heating elements, removed old drip bowls, replaced with new drip bowls, re-connected heating elements. Done! Looks like a new stove!
Was this helpful?
Thank you for voting!
stove top in rental home missing a chrome drip bowl
0 of 1 people found this instruction helpful.
  • Sheila from Wellton, AZ
  • Really Easy
  • Less than 15 mins
I installed the chrome drip bowl and plugged in the burner to make sure that it worked. Voila!! everything is now perfect and i have a happy renter. thank you so much for your fast delivery.
Was this helpful?
Thank you for voting!
instructions could be better
0 of 6 people found this instruction helpful.
  • WILLARD from GLOVERSVILLE, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
it was hard to figure out the instructions from A switch to B switch to my switch. The first switch was no good the second one was good. prayer book didn't hurt.thank
Was this helpful?
Thank you for voting!
Burner constantly heated
  • Clifford from New smyrna beach, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Good directions
Was this helpful?
Thank you for voting!
Front Burner,no control of.
  • Joseph from Baden, PA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The original controls were different for the small burners and the large burners. The replacement part fits all. Before removing wires, pay attention to writing on new and old control and replace 1 at a time. The hardest part was being sure to cut the knob stem to the correct length. Control works well.
Was this helpful?
Thank you for voting!
R had ight front control made loud noise when contacts opened.
  • James from Nashville, AR
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
This is twin oven range with controls at side of upper oven. Control panel was fastened with screws at top and bottom. Range has built-in hood at top which had to be disassembled to reach top screw. Once had access to top screw, eaisly removed control panel and replaced control. New control had identical connections as old control so only had to install it, break shaft to correct length, and use proper shaft adapter for knob. Remounted control panel and range worked perfectly. This would have been a very quick job except for having to deal with the built-in range hood.
Was this helpful?
Thank you for voting!
Knob had broken off
  • DeeAnn from Clinton, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My husband was able to easily remove and replace the switch and know with-in 15 minutes.
Was this helpful?
Thank you for voting!
scorched burner drip bowls, plating peeled
  • Charlene from Portland, OR
  • Really Easy
  • Less than 15 mins
It only took a few minutes to remove the old drip bowls and insert the new ones. No harder than cleaning! It's nice to cook things on my range now and not have drip bowls with scorched on food causing a fire hazard or setting off the smoke alarms.
Was this helpful?
Thank you for voting!
Drip bowls very old and crusty
  • Sherie from Tacoma, WA
  • Really Easy
  • Less than 15 mins
It was a piece of cake to replace them. Wish I had done it sooner with correct bowls, had purchased replacements from hardware store which were poor quality. :(
Was this helpful?
Thank you for voting!
Drip pans. Seriously easy
  • Karen from Norwich, CT
  • Really Easy
  • Less than 15 mins
Made my range look brand new. I originally had generic drip pans that rusted and look terrible. Hopefully these OEM ones last longer. Now the burners are level because they slot into the drip pan. Just pull the burners out with your hands and replace the pans. Very east.
Was this helpful?
Thank you for voting!
rht. front element would not heat properly
  • Rod from Huron, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I read parts select instructions and i was done in less than 30 minutes. Since 1988, this is the 1st. part that I had to replace. I now have parts select on my favorites list.
Was this helpful?
Thank you for voting!
element heat wouldn vary
  • Leonard from Winter, WI
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
slid the range away from wall. disconnect power. removed back,compared switches and marked wires.installed new switch and wires.the adapter for the control knob was a problem it left the knob out futher than original i had to modify the plastic adapter and got it close enought! the most time spent was cleaning up the floor before putting the range back.
Was this helpful?
Thank you for voting!
Shaft for burner control knob broke off
  • Carol from Hamilton, OH
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I flipped breaker off for electic and confirmed that power to the stove was off. I removed the 2 screws holding the control unit in place. Carefully removed all knobs and buttons and pryed the cover for the control unit off. I then removed old part, removed the wired and clipped wires to the new unit. Put cover back on - has some difficul ty getting the panel back in place to line up the screws. But after a couple of attempts, was able to line up unit and put screws in place to secure. Replaced all knobs. Turn breaker back on and cooked lunch. Very easy job. Most difficult part was getting panel back in position. I would watch alignment more carefully before I removed in next time. Easy home repair for Women...not sure about my man?
Was this helpful?
Thank you for voting!
All Instructions for the L3B325GL2
16 - 30 of 38