KUDP2 KitchenAid Dishwasher - Parts

This set of four dishrack rollers is intended for use with the upper rack of your Whirlpool/KitchenAid brand dishwasher. Each roller is white and an inch in diameter. These rollers are to be used with KD20 and later models of KitchenAid dishwashers.

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

This is a 12oz (about 355 ml) can of black spray paint that is compatible with a variety of different home appliances and is used to cover and conceal any visible scuffs, scratches or chips. This can is sold individually, so consider how much paint you need for your appliances prior to placing an order. To use this spray paint, make sure ...Read moreto have the proper personal protective equipment, such as protective glasses or gloves, as well as a respirator. Clean the surface of whatever you are spraying before you begin and shake the can for 1 minute after hearing the internal mixing balls rattle. Do not spray during high heat or humidity, spray at room temperature and in several thin coats to ensure the best adherence.

This lower dishrack does not include the rollers, axles or corner splash guards. The color of the rack is no longer blue, but light ice gray.

This part releases the doors on the detergent dispenser.

This piece of insulation goes behind the very bottom access panel of the dishwasher. This insulation helps reduce the noise produced by the dishwasher when it is in use.

Sold individually.

This black lower wash arm support with self cleaning filter is seven inches in diameter.

It does not have a cover for any of the sections, but there is a handle at either end so that you can quickly and easily remove it from your dishwasher.

This is the front panel for your dishwasher door and access panel.