- Home
- KUDA22SWWH1
- Instructions
KUDA22SWWH1 KitchenAid Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hose kept slipping off - stretched out of shape from use and age.
0 of 1 people
found this instruction helpful.
-
Barbara K. from Lorain, OH
- A Bit Difficult
- Less than 15 mins
Used a heat gun (or hair dryer could probably work)to stretch the ends of the hose to slip over areas to connect.
Was this helpful?
Thank you for voting!
the delivery tube was worn out with holes
0 of 1 people
found this instruction helpful.
-
Elwood from Battlecreek, MI
- Really Easy
- Less than 15 mins
the tube slid off and I used some liquid soap to spread on the end of each tube and I slid the new tube back on with ease and the upper rack of dishes now get cleaned/rinsed.
Was this helpful?
Thank you for voting!
hose had blown a hole
0 of 1 people
found this instruction helpful.
-
Debra from Windham, CT
- Really Easy
- Less than 15 mins
just popped the old hose off and put the new one on. the part was shipped very quickly and I received it within a week even during the holidays
Was this helpful?
Thank you for voting!
water tube split and fell on drying element
0 of 1 people
found this instruction helpful.
-
Alan from Spooner, WI
- Really Easy
- Less than 15 mins
Removed old tube, moistened both ends of new tube with hot water and slid over inlet and outlet holes. Repair done!
Was this helpful?
Thank you for voting!
hole in the tube, wear and tear on it
0 of 1 people
found this instruction helpful.
-
Merdell from Montgomery, TX
- Easy
- Less than 15 mins
I removed the old tube--I had taped over the hole. I didn't quite have the hand strength to fit over the ends and push the new tube into place. So, my husband did that at both ends without a problem. I'm relying on PartSelect for when I need parts for my 13 year-old appliances.
Was this helpful?
Thank you for voting!
The dishwasher did not do its job well.
0 of 1 people
found this instruction helpful.
-
Wendell from Fish Creek, WI
- Really Easy
- Less than 15 mins
It was simple. I simply replaced the old water tube with the new one you sent, and it works like new. Piece of cake.
Was this helpful?
Thank you for voting!
Dishwasher not cleaning as rubbr water tube cracked
0 of 1 people
found this instruction helpful.
-
Janice from Napa, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed clips on the end of the rack, removed the rack, and pulled old tube off. Used plain water as a lubricant to ease replacement of new tube on the dilated end. Very easy!
Was this helpful?
Thank you for voting!
the rubber tube was falling apart
0 of 1 people
found this instruction helpful.
-
GLORIA from HASTINGS, NE
- Really Easy
- Less than 15 mins
In my case the rubber tube was so worn that it came off very easily. I removed the tube, then with a little cooking oil, I lubricated the new hose and easily slipped it into place. Now my dishwasher works great! I ordered the part received it and repaired it for less than $20.00 and in less than 15 minutes.
Was this helpful?
Thank you for voting!
Worn out water tube.
0 of 1 people
found this instruction helpful.
-
Daniel from Nine Mile Falls, WA
- Really Easy
- Less than 15 mins
Took old one off and put new one on, about a 4 minute job.
The part was about 1/3 of the cost if I had bought it local.
The part was about 1/3 of the cost if I had bought it local.
Was this helpful?
Thank you for voting!
Tude was disintegrating.
0 of 1 people
found this instruction helpful.
-
Edward from Winchester, MA
- Really Easy
- 15 - 30 mins
Removed old tube.
New tube was a little tight, so I heated it with a hair dryer and used dish washing detergent - Joy - as a lubricant. Then the tube slipped on easily.
New tube was a little tight, so I heated it with a hair dryer and used dish washing detergent - Joy - as a lubricant. Then the tube slipped on easily.
Was this helpful?
Thank you for voting!
The rubber tube for the top rack was rotted in half, not allowing the dishes to properly be cleaned.
0 of 1 people
found this instruction helpful.
-
Robert from Powell, OH
- Really Easy
- Less than 15 mins
First the water tube arrived two days earlier than what I was expecting. I pulled the old tube off and slipped the new tube on by hand. The dishes in the top rack are now a lot cleaner than they have been for the past couple of months. In the future if I need repair parts this is where I will be coming to get them.
Was this helpful?
Thank you for voting!
Roller axles dried out and brittle and broke
0 of 1 people
found this instruction helpful.
-
Sherry from Lexington, KY
- Easy
- 15 - 30 mins
-
Pliers
Removed bottom rack and replaced axles and wheels, works just like new and did it without any assistance from my son or Husband.
Other Parts Used:
Was this helpful?
Thank you for voting!
Old water tube had worn through and was falling off.
0 of 1 people
found this instruction helpful.
-
Corinne from El Granada, CA
- A Bit Difficult
- 15 - 30 mins
Removed old water tube and replaced it with the new one. Hard part was logistically trying to put it below the rack and it obviously it had to fit very tight and it was quite difficult to get in place, but I did it! Thanks to your easy to use website and excellent service. I was proud of myself for doing the whole job start to finish,
... Read more
and my husband was even more impressed. Only downside to that is that I think he'll be playing more golf, while I do the repair work from now on.
Read less
Was this helpful?
Thank you for voting!
No Water Coming Into Dishwasher
0 of 1 people
found this instruction helpful.
-
DANNY from MORONGO VALLEY, CA
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Repair was fairly easy, had to swith the mounting bracket from the old valve no problem. Install reconnected the water and the dishwasher works great now!
Was this helpful?
Thank you for voting!
Rollers and axels were worn out.
0 of 1 people
found this instruction helpful.
-
Shirley from Tucson, AZ
- Easy
- 15 - 30 mins
Very easily!! I am 19 years old and repaired the dishwasher for my grandmother in about 15 minutes. Great products.
Other Parts Used:
Was this helpful?
Thank you for voting!