KUCC151J KitchenAid Trash Compactor - Instructions

Needle nose pliers pulled the end stuck inside. Installed new start switch knob.

Removed the switch knob, the outer nut, and the front plate.
Unplugged the old switch from the 3 wires and plugged them into the new switch and put it back together with the new knob. Probably less than 5 minutes.

Upon the receipt of my part it just had to be slipped into place. I had the part I needed within 3 days of ordering.
My had ordered parts for various items in the past and we have always been very satisfied with the care and experteis of this company.

replaced

Removed the old filter and screen and replaced with the new!

Saved screws from old handle, used to mount new handle.

Unscrewed. Screwed on the new one.

Replace front legs. Very easy fix.

Removed and replaced in less than 15 minutes. Works like new again

1. Loosen screws to remove old handle. 2. Insert new handle into position, align holes on steel backing with connectors on back of handle. 3. Screw on 3 screws, beginning with middle, then left & right. 4. Tighten to firmness. 5. Close & open to test for installation compketeness.

Unscrew and remove old handle and replace with new one.

Clipped new piece into place

PUT FILTER IN PLACE AND SNAPPED IN

Super easy - removed the TOP three screws from behind the door. Wiggled the handle out pulling upwards. Slid the new handle in and screwed it back into place. More importantly I had my part the very next day - AWESOME. Thank you.

I flipped this unit over,removed 4 screws to the drive gear.I tore apart found a nut came off the screw rod.Which broke the drive gear.I looked on line found the parts select page.That showed the diagram i needed,to order parts, i needed.The wife and i tackled this task,of repairing this product.The repair was quick and easy.It took less ... Read more than 30 minutes including cleanup.The wife happy,that all that matters.
Jack